[Mg-t] TD transmission question continued.

[Lew Palmer]

Mike, I believe you are correct. I just had my TD's (TD3042) gearbox out
this past spring and do not recall that the shaft extended any significant
distance into the rear housing. It's back in the car and I'm not looking
forward to having to remove it again, although a replacement of the shifting
forks and sliding hubs is in its future - very near future.

Cheers,
Lew Palmer

P.S. How are the wiper parts working out? 

-----Original Message-----
From: mg-t-bounces+lpalmer=roundaboutmanor.com at autox.team.net
[mailto:mg-t-bounces+lpalmer=roundaboutmanor.com at autox.team.net] On Behalf
Of Mike Duvall
Sent: Wednesday, October 10, 2007 1:32 PM
To: MGtseriesowners at yahoogroups.com; mg-t at autox.team.net; MG_TABC; mgs;
british-cars at autox.team.net
Subject: [Mg-t] TD transmission question continued.

Can anyone with an early TD transmission send me the dimension for  
how far the 3rd/4th selector shaft extends from the selector?   Mine  
is 7/16th and I think that is an incorrect amount.  The early  
transmission did not have a shaft that ran into the remote housing.    
I think someone took a later shaft cut it off and got the length wrong.

I can send a picture if you need it.

thanks,  MIke
_______________________________________________
lpalmer at roundaboutmanor.com

Mg-t at autox.team.net
http://autox.team.net/mailman/listinfo/mg-t

Archives at http://www.team.net/archive