From jay at ukhistoric.com Tue Apr 10 18:16:47 2012 From: jay at ukhistoric.com (jay at ukhistoric.com) Date: Tue, 10 Apr 2012 20:16:47 -0400 Subject: [Mg-mmm] PB Clutch Housing? Message-ID: <45c2ff1587e088f6158b66a1569df753.squirrel@204.14.90.12> Going through a full engine rebuild on the PB race motor. Found that the clutch pressure plate housing isn't in great shape and one of the side pins was broken. Does anyone have a good PB pressure plate and pins they could give up? I have a good disk, springs, and "throw-out" bearing - just need the housing and pins. Thanks! Jason. P1237 with PB motor. Kintnersville, PA. From taterry at aol.com Tue Apr 10 18:51:58 2012 From: taterry at aol.com (taterry at aol.com) Date: Tue, 10 Apr 2012 20:51:58 -0400 (EDT) Subject: [Mg-mmm] PB Clutch Housing? In-Reply-To: <45c2ff1587e088f6158b66a1569df753.squirrel@204.14.90.12> References: <45c2ff1587e088f6158b66a1569df753.squirrel@204.14.90.12> Message-ID: <8CEE5946E8AAFEB-1A44-C121@webmail-d095.sysops.aol.com> Jason, I might have one...can you identify the part you need y reference to Barry Walkers catalog? Terry in Oakland CA -----Original Message----- From: jay To: mg-mmm Sent: Tue, Apr 10, 2012 5:19 pm Subject: [Mg-mmm] PB Clutch Housing? Going through a full engine rebuild on the PB race motor. Found that the lutch pressure plate housing isn't in great shape and one of the side ins was broken. Does anyone have a good PB pressure plate and pins they could give up? I ave a good disk, springs, and "throw-out" bearing - just need the housing nd pins. Thanks! ason. 1237 with PB motor. intnersville, PA. ______________________________________________ Mg-mmm at autox.team.net onate: http://www.team.net/donate.html uggested annual donation $11.47 rchive: http://www.team.net/archive orums: http://www.team.net/forums nsubscribe/Manage: http://autox.team.net/mailman/options/mg-mmm/taterry at aol.com From coles at colesnurseries.com Thu Apr 12 14:39:39 2012 From: coles at colesnurseries.com (Dan Fest) Date: Thu, 12 Apr 2012 16:39:39 -0400 Subject: [Mg-mmm] mg parts Message-ID: Looking for a few parts so figured I'd ask: -mmm gages - tach, speedo, etc. -mmm 6 cylinder K/L engine parts including proper distributor, dynamo, oil pump, front support and front housing -PA 1st motion shaft. If you have anything and would like to sell, please contact me. As always, thanks, Dan From taterry at aol.com Thu Apr 12 18:44:03 2012 From: taterry at aol.com (taterry at aol.com) Date: Thu, 12 Apr 2012 20:44:03 -0400 (EDT) Subject: [Mg-mmm] Fwd: birthday In-Reply-To: <4F8769EA.10502@pacbell.net> References: <4F8769EA.10502@pacbell.net> Message-ID: <8CEE725A86FE394-18B8-EC0F@webmail-d095.sysops.aol.com> -- On this date in 1888, MG founder Cecil Kimber was born From rothgene at msn.com Thu Apr 12 23:25:26 2012 From: rothgene at msn.com (Rothgene Roth) Date: Thu, 12 Apr 2012 22:25:26 -0700 Subject: [Mg-mmm] [mg-tabc] Fwd: birthday In-Reply-To: <4F8769EA.10502@pacbell.net> <8CEE725A86FE394-18B8-EC0F@webmail-d095.sysops.aol.com> References: <4F8769EA.10502@pacbell.net> <8CEE725A86FE394-18B8-EC0F@webmail-d095.sysops.aol.com> Message-ID: My mother was 11 years old Gene Roth ----- Original Message ----- From: taterry at aol.com To: mg-t at autox.team.net ; mg-mmm at autox.team.net ; mg-tabc at yahoogroups.com Sent: Thursday, April 12, 2012 5:44 PM Subject: [mg-tabc] Fwd: birthday -- On this date in 1888, MG founder Cecil Kimber was born [Non-text portions of this message have been removed] __._,_.___ Reply to sender | Reply to group | Reply via web post | Start a New Topic Messages in this topic (1) Recent Activity: a.. New Members 1 a.. New Files 5 Visit Your Group Switch to: Text-Only, Daily Digest . Unsubscribe . Terms of Use. __,_._,___ From mark at bradakis.com Tue Apr 17 23:03:00 2012 From: mark at bradakis.com (Mark J Bradakis) Date: Tue, 17 Apr 2012 23:03:00 -0600 (MDT) Subject: [Mg-mmm] Supercharger? Message-ID: <20120418050300.082682E07B@bradakis.com> Anyone recognize this supercharger? Who made it, any info? http://bradakis.com/Images/super1.jpg http://bradakis.com/Images/super2.jpg http://bradakis.com/Images/super3.jpg It was last used on an MG TF according to the fellow who last owned it. Thanks, mjb. From rwgarnett at gmail.com Wed Apr 18 21:12:25 2012 From: rwgarnett at gmail.com (Roger Garnett) Date: Wed, 18 Apr 2012 23:12:25 -0400 Subject: [Mg-mmm] Supercharger? In-Reply-To: <20120418050300.082682E07B@bradakis.com> References: <20120418050300.082682E07B@bradakis.com> Message-ID: OK, a bit big for my PA. What's the plate on the side say? On Wed, Apr 18, 2012 at 1:03 AM, Mark J Bradakis wrote: > Anyone recognize this supercharger? Who made it, any info? > > http://bradakis.com/Images/super1.jpg > http://bradakis.com/Images/super2.jpg > http://bradakis.com/Images/super3.jpg > > > It was last used on an MG TF according to the fellow who last > owned it. > > Thanks, > > mjb. > _______________________________________________ > > Mg-mmm at autox.team.net > Donate: http://www.team.net/donate.html > Suggested annual donation $11.47 > Archive: http://www.team.net/archive > Forums: http://www.team.net/forums > Unsubscribe/Manage: > http://autox.team.net/mailman/options/mg-mmm/rwgarnett at gmail.com > > -- Roger Garnett rwgarnett at gmail.com