[Land-speed] new product for racers

[David Anderson]

I've tried welding plastic before and with a novice hand have had mixed 
results.  The MR2 had broken out screw holes that I filled. It works great 
as long as I don't torque them too much.
David

----- Original Message ----- 
From: "Jim Dincau" <jdincau at qnet.com>
To: "J.D. Tone" <gmc6power at earthlink.net>; "David Anderson" 
<mactem at mebtel.net>; "lsr" <land-speed at autox.team.net>
Sent: Thursday, November 13, 2014 10:08 AM
Subject: Re: [Land-speed] new product for racers


> J. D., when my son Tony was working on the foundations for the sewage 
> treatment plant down in L.A. he became a "certified" welder of the plastic 
> sheet facing on the inside of the forms they poured concrete in.
>
> -----Original Message----- 
> From: J.D. Tone
> Date: Wednesday, November 12, 2014 9:17 PM
> To: David Anderson ; lsr
> Subject: Re: [Land-speed] new product for racers
>
> I've been learning how to "weld"  Pvc plastic on our  dirs cars front end.
> This looks a lot easier. The blue looks to be a pretty good match. You 
> would
> be surpised what a heat gun and a soldering iron with at flat end tool can
> do...JD
> _______________________________________________
> Land-speed at autox.team.net
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/land-speed/jdincau@qnet.com