[Land-speed] Penetrating Oils
Ed Van Scoy
ed at vetteracing.com
Tue Apr 6 15:44:19 MDT 2010
Penetrating Oils Compared
Machinist's Workshop magazine actually tested penetrates for break out
torque on rusted nuts. Significant results! They arranged a subjective
test
of all the popular penetrates with the control being the torque
required to
remove the nut from a "scientifically rusted" environment.
Penetrating oil ..... Average load
None ..................... 516 pounds
WD-40 .................. 238 pounds
PB Blaster ..............214 pounds
Liquid Wrench ...... 127 pounds
Kano Kroil ............ 106 pounds
ATF-Acetone mix... 53 pounds
The ATF-Acetone mix was a "home brew" mix of 50 - 50 automatic
transmission
fluid and acetone.
Note the "home brew" was better than any commercial product in this one
particular test. A local machinist group mixed up a batch and all now
use it
with equally good results. Note also that "Liquid Wrench" is about as
good
as "Kroil" for about 20% of the price.
I have found the "heat wrench" best for anger management even if some parts are sacrificed.....
Ed Van Scoy
#128 B/GT Corvette
SCTA-BNI/Gear Grinder
More information about the Land-speed
mailing list