[Land-speed] Blade Type Male Connector Pins

[glen barrett]

Try
www.terminalsupply.com
They have all types even ford stuff.
Glen
----- Original Message ----- 
From: "drmayf" <drmayf at mayfco.com>
To: "LSR" <land-speed at autox.team.net>
Sent: Saturday, November 28, 2009 6:01 PM
Subject: [Land-speed] Blade Type Male Connector Pins


> Well, time to start the dumb questions.    I am in need of  some Ford 
> Connector pins. I want to make some extender test cables for my EFI 
> harness in the Sunbeam.  I can find and have some   round pins that will 
> work for three of the sensor cables but two sensors and the fuel 
> injectors have eluded me. These are blade type pins which appear to be 
> about 2.5 mm wide and fairly thin. Like a skinny push on type but 
> skinnier and longer.  I have looked at Motorcraft connectors, 
> FordFuelInjection.com, Delphi-Packard, Digikey, Allied Electronics and 
> Waytek Wire.   For you ford guys, pin examples are the Mass air flow 
> sensor pins, the TFI sensor pins, and for all of you the fuel injector 
> pins. These are all flat pins. I can find the female parts but so far, 
> no male pieces.  Any of you guys have a favorite source that might have 
> these kinds of pins?
> 
> Many thanks
> 
> mayf
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> Land-speed mailing list
> 
> You are subscribed as speedtimer at beyondbb.com
> 
> http://autox.team.net/mailman/listinfo/land-speed