[Land-speed] brake part needed

[David in Durango]

Open 9-5 in observance of the holiday.
YMMV (your mileage may vary)





----- Original Message ----- 
From: "Dick J" <lsr_man at yahoo.com>
To: "lsr list autox" <land-speed at autox.team.net>; "Doug Odom" 
<dlodom at charter.net>
Sent: Sunday, May 24, 2009 4:37 PM
Subject: Re: [Land-speed] brake part needed


> That was going to be my next step.  I figured I could use a female heims 
> joint
> for the pedal end, and a cut-off grade 8 bolt with a jam nut for the rod
> itself.  Looks like a trip to Ace Hardware on Tuesday.
>
> DickJ
>
> --- On Sun, 5/24/09, Doug Odom <dlodom at charter.net> wrote:
>
>
> From: Doug Odom <dlodom at charter.net>
> Subject: Re: [Land-speed] brake part needed
> To: "Dick J" <lsr_man at yahoo.com>, "lsr list autox"
> <land-speed at autox.team.net>
> Date: Sunday, May 24, 2009, 5:26 PM
>
>
> Dick, Just make your own. If you can't, just send me a drawing and I will 
> make
> you one. You can spend more time messing around looking for one than it 
> takes
> to make one.       Doug in big ditch
>
> Subject: [Land-speed] brake part needed
>
>
>> Does anybody know where I can find a master cylinder brake pedal push rod
>> (manual brakes)  for a 1978 Firebird.  I have looked all over the intenet
> and
>> in every catalog I can find. My local dealer get's a "deer in the
> headlights
>> stare" when I mention a model older that 2005!
>>
>> thanks,
>> DickJ
>> In east Texas
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as adin at frontier.net
>
> http://autox.team.net/mailman/listinfo/land-speed