[Land-speed] Off Toopic: 1991 F150 Truck Issues

Bryan Savage b.a.savage at wildblue.net
Tue Jul 28 10:52:01 MDT 2009


You can buy Ford crate engines with a lot of cam. What are the specs on 
that cam?

Bryan

drmayf wrote:
> I spent 17 hours this week end with another guy and we made some very 
> good progress on the truck.  Itseemed that everything we touched had 
> to be redone in some form or fashion.  After being tolf that the 
> exhaust manifolds, the cast iron ones, were the same as what came off 
> the truck to begin with, when trying to fit up the down pipes, fout 
> out otherwise. Finally located a y pipe that fir the motor with odd 
> manifolds, but no O2 bung.  Some connectors not connected.  Late 
> yesterday found a connector a the far back end of the manifold not 
> connected. Suspect it is for a knock sensor but this block has no 
> knock sensor threaded hole location.  The engine runs great above 2000 
> rpm. Runs like crap at 1000 rpm. I have run out of ideas and gumption 
> in working on this thing.  If there are any other ideas about why it 
> would not run at 1000 but runs like a scalded dog at 2000 lemme know 
> and I will pass it along..
>
> See ya'll on the salt...
>
> mayf
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as b.a.savage at wildblue.net
>
> http://autox.team.net/mailman/listinfo/land-speed


More information about the Land-speed mailing list