[Land-speed] ratchet wrenches

[drmayf]

Yep bought a metric and sae set for less than 100 total. 5/1 trhough 3/4 
for the sae and do not remember th emetric but equivalent. They were not 
craftsman however but something like gear wrench. Seem  to work ok.

mayf
Glen Barrett wrote:

> SEARS comes to mind.
> GB
> ----- Original Message ----- From: "Benn" <karhu at california.com>
> To: <land-speed at autox.team.net>
> Sent: Thursday, January 29, 2009 11:42 AM
> Subject: [Land-speed] ratchet wrenches
>
>
>> Looking to get a set of ratchet box-end wrenches.  It would seem that 
>> besides
>> a fine-tooth ratchet, one would want the smallest possible head 
>> diameter (the
>> thinnest I've seen are about 3/16" total wall thickness including the 
>> moving
>> socket and stationary outer wall).  Some of the cheaper 
>> sheetmetal-sandwich
>> types have horrendously large heads.  I also want units that are 
>> reversible,
>> so that they can have the fixed angled offset.  I'm not hot on flex-head
>> types, which always seem to move when you don't want them to.  And 
>> just to
>> make it tougher, I probably can't rationalize a $100+ Snap-On set.
>> Recommendations?
>> Benn
>> _______________________________________________
>> Support Team.Net  http://www.team.net/donate.html
>>
>> Land-speed mailing list
>>
>> You are subscribed as speedtimer at beyondbb.com
>>
>> http://autox.team.net/mailman/listinfo/land-speed
>
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as drmayf at mayfco.com
>
> http://autox.team.net/mailman/listinfo/land-speed