[Land-speed] Fw: piston rings

[Doug Odom]

I have already looked at Childs & Albert, Perfect Circle, Grant, Total Seal. 
I was hoping someone had another  source.      Doug
----- Original Message ----- 
From: "Doug Odom" <dlodom at charter.net>
To: "landspeed at autox.team.net" <land-speed at autox.team.net>
Sent: Wednesday, October 15, 2008 9:44 AM
Subject: [Land-speed] piston rings


> List, I need to find some rings for a 4 cylinder race motor. The bore is
> 63.5mm or 2.5"
> Top grove in piston is .037== old ring was .0355
> Second grove in piston is .039== old ring was .038
> Oil grove in piston is .080== ring was .081
>
> I can machine larger groves in the piston if that is the only rings I can
> get.
> Thanks, Doug Odom in big ditch
>
> ps. This motor started life as a Kawasaki industrial motor and was sleeved
> down to run in a TQ Midget.
> That was 20 years ago and the ring supplier is not around anymore.
> _______________________________________________