[Land-speed] Clutch Throw Out Bearing

[Doug Odom]

Dick, There are at least 3 different TO bearings used with the chevy that I 
know of. The 3 finger Borg and Beck, the diaphragm and the raised diaphragm. 
Also you must use the correct lever arm for the TO bearing you are using or 
the linkage will be messed up. The 3 fingered B&B type uses the flat surface 
one.    Doug Odom in big ditch
----- Original Message ----- 
From: "Dick J" <lsr_man at yahoo.com>
To: "lsr list autox" <land-speed at autox.team.net>
Sent: Friday, August 29, 2008 6:57 PM
Subject: [Land-speed] Clutch Throw Out Bearing


> How do you tell a throw out bearing for a three-finger pressure plate vs. 
> a
> diaphragm plate?  Or are they inter-changeable?  In my street rod project,
> built with left-over parts, I am using a three finger 10" clutch with a 
> Borg
> Warner T-4 transmission.  As far as I know, the T-4s only came with 
> diaphragm
> clutches.
>
> DickJ
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Land-speed mailing list
>
> You are subscribed as dlodom at charter.net
>
> http://autox.team.net/mailman/listinfo/land-speed