[Land-speed] Wiring and Fuses

[neil at dbelltech.com]

Dick;

I checked the Weldon website and they show a current draw of 20 amps for
their larger pumps. Check your pump; 10A may not be high enough.

Regards, Neil  Tucson, AZ

-----Original Message-----
From: land-speed-bounces+neil=dbelltech.com at autox.team.net
[mailto:land-speed-bounces+neil=dbelltech.com at autox.team.net] On Behalf Of
Dick J
Sent: Sunday, October 28, 2007 2:09 PM
To: lsr list autox
Subject: [Land-speed] Wiring and Fuses

I'm getting ready to re-wire my car with a new fuse block and switch panel.
I figure:
   
  10A for Fuel pump; 
  10A for Water pump, 
  25A for dual radiator fans, 
  10A for transmission cooler fan.  
   
  What should I use for the ignition (Mallory Unilite with Pro-master coil).
I'm thinking 10A, but don't know for sure.
   
  DickJ
  In East Texas