[Land-speed] Cutting Oil

[Jim Dincau]

http://www.use-enco.com/CGI/INSRIT?PARTPG=INSRAR2&PMAKA=505-2037&PMPXNO=945818

Try this, it's a good all around cutting/taping fluid. Messy and smelly but 
it works on almost everything. You can get almost the same thing if you buy 
pipe threading oil at the local hardware store.
Jim in Palmdale

> Santa just made an early visit and dropped of a nice new drill press and 
> set of bits.  She also warned me that I'd "better treat this one right".
>
>  Anybody got any old family secrets for cutting oil to use with a drill 
> press?  I've always used whatever was available:   WD-40, 3-in-1, auto 
> transmission fluid, power steering fluid, left-over motor oil, etc, and 
> these are probably not the greatest and best choices.