<div dir="ltr"><div dir="ltr"><div dir="ltr"><div class="gmail_default" style="font-size:large">Have my OD partially dismantled to hopefully sort out two oil leaks. These only show up when the GB and OD are really hot.</div><div class="gmail_default" style="font-size:large">Queries:</div><div class="gmail_default" style="font-size:large">(1) Is there a cross reference list with stud details - lengths in particular. I believe that I have a few rogues and would like to correct them. Have the correct part numbers but no details ? Any known suppliers ? the usual suppliers don't list them.</div><div class="gmail_default" style="font-size:large">(2) One of the leaks is at the rear annulus at the brake ring, where it is clamped without gaskets between the 2 housings.So what goo is suggested ? Was planning to use a thin smear of Permatex #2 (as suggested by a fellow that repairs many OD) or Hylomar. Previously a red anaerobic sealant was used - BTW it is a real bear to clean off.</div><div class="gmail_default" style="font-size:large">rg</div></div>
</div>
</div>