<div dir="auto"><img src="cid:ii_1958093594fe034fa951" style="max-width: 100%; height: auto;"><br><img src="cid:ii_195809bba1bf1b4b14f2" style="max-width: 100%; height: auto;"><br><br><div dir="auto">I'm working on a Concours Guidelines update about reflectors and would appreciate some help.<div dir="auto">I  have these 3 examples. </div><div dir="auto"><br></div><div dir="auto">1. This type has a grooved rubber back allowing it to be inserted into a hole in the plinth pressed into the rear shroud of earlier 6 cylinder cars.</div><div dir="auto">2. This is a type that I don't know about.  It appears to require an outer lens (probably the colical type) BUT it has a 10/32 thread sticking out the back such as the later 100 type did.</div><div dir="auto">3. This type has the same back side as #1 but the front looks to me to be of the type fitted to the plinth on the later 100's.</div><div dir="auto"><br></div><div dir="auto">I suspect that #s 2 and 3 are not Healey but am open to being corrected.</div><div dir="auto"><br></div><div dir="auto">M</div></div></div>