<div dir="ltr">Hello,<div><br></div><div>I was able to get the aluminum trim off my 65 year old top. I used all of the suggestions and have these comments.</div><div>The black caulk is very brittle after 65 years and will separate from the aluminum when persuaded. I used an oscillating multitool about every 4" per Jean's recommendation. It didn't move the aluminum too much but it helped to break the bond with the black caulk. Next step was a piece of 1x3 wood and hammer gently tapping along the edge of the aluminum until it was free. I tried a few solvents but the aluminum fits so tight the solvents can't penetrate. I did use a heat gun but not sure if it helped. It would have expanded the aluminum a bit which may have helped break the bond with the caulk.</div><div><br></div><div>Hope this helps the next person to take apart a hard top.</div><div><br></div><div>Harold</div><div><br></div><div><br></div></div>