<!DOCTYPE html>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
No one's tackled this yet, so I'll take a stab. This sounds a little
bit like 'torque steer' that some FWD cars have (though it's been
largely eliminated in newer FWD cars). Healeys, of course, are RWD
so it's not that, and I've not experienced nor heard of this problem
in a Healey. The front suspension isn't linked to the drive train in
any way, so I'd check engine mounts; it's conceivable, but not
likely the rocking of the engine could cause it to hit the steering
column (the carbs are pretty close to it). If the chassis is somehow
tweaked it might cause some tracking issues, though it would likely
be under all conditions. Presumably, you've checked to assure the
steering box is properly anchored?<br>
<br>
That's all I got.<br>
<br>
Bob<br>
<br>
<div class="moz-cite-prefix">On 8/14/2024 7:45 PM, JONAS PAYNE
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:DM6PR01MB373964610227F86E9B194196F8802@DM6PR01MB3739.prod.exchangelabs.com">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<style type="text/css" style="display:none;">P {margin-top:0;margin-bottom:0;}</style>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
I have an early BJ8 that has been thoroughly gone through.
Pretty much new everything. Recently I have experienced a
jiggle/pull in steering when getting on and off throttle,
admittedly with a heavy right foot. Doesn't necessarily pull
to one side or the other, just jiggles a moment. It's an on/off
throttle thing, doesn't do it when braking. </div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
I've checked the rear - everything seems tight, and all bushings
have been replaced. motor mounts are good, transmission tension
rod/bushings are good. little or no play in the front end, all
new there too. Front end alignment appears to be good.
Steering box is properly adjusted and has normal "play" for a
cam and peg box as with my TR3's and Morgan + 4's. </div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
It isn't dangerous, but it doesn't feel right. That said, for
all I know, it's part of the "vintage healey experience". I
have 5 other vintage british sports cars and each has their own
issues that are part of their charm. </div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Would appreciate anybody's experiences thoughts. </div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
Jonas</div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div class="elementToProof"
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<div
style="font-family: Aptos, Aptos_EmbeddedFont, Aptos_MSFontService, Calibri, Helvetica, sans-serif; font-size: 12pt; color: rgb(0, 0, 0);">
<br>
</div>
<hr style="display: inline-block; width: 98%;"><br>
</blockquote>
</body>
</html>