<div dir="ltr">This is a long shot, but is it possible that the piston in your clutch master cylinder is not retreating far enough to open the vent hole between the fluid reservoir and cylinder?  When the fluid heats up it expands a little, if it can't vent to the reservoir it could build up  pressure in your slave cylinder causing the clutch to slip.  That would explain why you only get slippage when things heat up.<div>Keith</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, May 8, 2024 at 4:24 PM Simon Lachlan via Healeys <<a href="mailto:healeys@autox.team.net">healeys@autox.team.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"> Just when you thought it was all over......<br>
So, thanks for all the replies and advice so far.<br>
I've only been able to get back to the car in the last few days. Better weather and negotiating various domestic hurdles (usual stuff).<br>
Mindful of specific advice:-<br>
1) I swapped the relay for a new one left over from the last bout. The one in the car passed the tests but it could have been marginal I suppose.<br>
2) I swapped the solenoid for a new one left over from the last bout. Ditto above.<br>
3) I adjusted the Throttle Switch. God, that's a wretched thing.<br>
4) Checked oil, electrics etcetc.<br>
5) Pressure good at +/- 520psi<br>
6) OD going in & out per usual tests ie when sitting in the garage<br>
Etcetc<br>
Took the car out for a longer trip today. Performed very well for about 10 miles then the slippage(?) started again. Especially on hills.<br>
Removed the OD's fuse which, I reckon, puts the OD out of the game. Symptoms continued.<br>
Now.....I know and I've experienced low OD pressure. All's well until oil warms up and pressure drops. But, now I've supposedly taken the OD out of the equation, I'm asking myself, "ODs are effected by their oil's temperature but the flywheel/clutch connection is friction. So, it either slips or it doesn't ie regardless of temperature."  Is that right???<br>
Despite that question/worry of mine, I am leaning very much towards clutch slip as opposed to OD, which is pretty new don't forget. The slip is pretty drastic and seems to have worsened noticeably. <br>
I'm reluctant to take the box out until I've ruled out a few alternatives. If there are any!<br>
Besides an issue at the clutch plate to flywheel connection, is there anything else that can cause this? <br>
Or are there other areas yet to be explored.<br>
I really need to get this thing fixed as am hoping to take it over to Ireland in July.<br>
Simon<br>
<br>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys" rel="noreferrer" target="_blank">http://www.team.net/pipermail/healeys</a> <a href="http://autox.team.net/archive/healeys" rel="noreferrer" target="_blank">http://autox.team.net/archive/healeys</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" target="_blank">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/mottman55@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/healeys/mottman55@gmail.com</a><br>
<br>
</blockquote></div>