<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body dir="auto">
Sounds like your pads are too hard.
<div>I instruct at tracks in a Sportscar and use hard pads while on the track and change them out to different pads for street use. The track pads squeal painfully until heated up on the track but they don’t get heated enough while street driving.</div>
<div>My BN7 doesn’t squeal but unfortunately I can’t tell you what brand I’m using when I rebuilt mine 10-12 years ago.<br id="lineBreakAtBeginningOfSignature">
<div dir="ltr">Regards,
<div>Richard C</div>
<div><br>
</div>
</div>
<div dir="ltr"><br>
<blockquote type="cite">On Apr 15, 2024, at 19:33, m.g.sharp--- via Healeys <healeys@autox.team.net> wrote:<br>
<br>
</blockquote>
</div>
<blockquote type="cite">
<div dir="ltr">
<meta name="Generator" content="Microsoft Word 15 (filtered medium)">
<style>@font-face { font-family: "Cambria Math"; }
@font-face { font-family: Calibri; }
p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm; font-size: 11pt; font-family: Calibri, sans-serif; }
span.EmailStyle17 { font-family: Calibri, sans-serif; color: windowtext; }
.MsoChpDefault { }
@page WordSection1 { size: 612pt 792pt; margin: 72pt; }
div.WordSection1 { page: WordSection1; }</style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="WordSection1">
<p class="MsoNormal"><span lang="EN-US">Hi all, I have had intermittent squealy brakes on my BT7 the last year or so. I got it out of hibernation a week ago and the squealing is worse, it seems. I don’t mind heads turning when I pull up at a light, but not
because it sounds like I just ran over a cat.<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span lang="EN-US">I put new pads in a few years back and installed the anti-squeal shims, but they did not work. Today I pulled out the pads, tossed the shims and lightly rubbed the pads on a sheet of #120 emery on a plate of glass,
just to take the sheen of the friction side and ensure the backs were flat. I took a file and gently broke the leading and trailing edges of the friction material, as the edges were quite sharp and though one could be catching. I then cleaned the pads with
brake part cleaner. I also lightly used emery on the disks to remove any glaze. I had gone to my local auto parts supplier to see if they had any anti-squeal shims but they don’t sell them separately from the pads. However, they highly recommended a
Permatex product with the promising name “Disc Brake Quiet” [sic]. This I applied per the instructions, spraying it on the back of the pads. I blew the dust out of the calipers and, as best I could, checked the pistons for irregularities where they bear
on the pads. The calipers were re-built about 5 years ago with stainless pistons and they looked as new. Retaining pins were cleaned and very lightly greased. I re-assembled everything and went out for a test drive.<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span lang="EN-US">The results were staggering in that there was no difference whatsoever.<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span lang="EN-US">So folks – any good ideas out there? I am wondering if should switch out the pads, but mine are barely worn and I am not sure I have record of what I put in, so may end up with the same make. Other than that, I am flummoxed.<o:p></o:p></span></p>
<p class="MsoNormal"><span lang="EN-US"><o:p> </o:p></span></p>
<p class="MsoNormal"><span lang="EN-US">All suggestions welcome.<o:p></o:p></span></p>
</div>
<span>_______________________________________________</span><br>
<span>Support Team.Net http://www.team.net/donate.html</span><br>
<span>Suggested annual donation $12.75</span><br>
<span></span><br>
<span>Archive: http://www.team.net/pipermail/healeys http://autox.team.net/archive/healeys</span><br>
<span></span><br>
<span>Healeys@autox.team.net</span><br>
<span>http://autox.team.net/mailman/listinfo/healeys</span><br>
<span></span><br>
<span>Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/gonnagitcha90@hotmail.com</span><br>
<span></span><br>
</div>
</blockquote>
</div>
</body>
</html>