<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
  </head>
  <body>
    <p>One should use what is in Europe known as "Hahn Fett" which
      literally translates from German to "Tap Grease". It is a graphite
      or perhaps molybdenum based grease which is used to lubricate all
      kinds of taps.<br>
      I have used it for years for domestic, industrial, automotive
      taps.<br>
      Kees Oudesluijs</p>
    <p><br>
    </p>
    <p><br>
    </p>
    <div class="moz-cite-prefix">Op 11-7-2023 om 15:22 schreef Bob
      Spidell:<br>
    </div>
    <blockquote type="cite"
      cite="mid:63ac8848-5cbf-df12-f591-9ffa4699f30e@comcast.net">
      <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
      Yep. Also, the cone part is held in with a spring under a washer
      held with a small cotter; you can use a thicker washer to get a
      bit more 'pull' on the cone. When I have one out, I put a thin
      smear of wheel bearing grease on the cone to help prevent
      sticking.<br>
      <br>
      I got 'too-clever-by-half' once and used valve lapping compound on
      the cone; it visibly scored the cone though it still sealed. Very
      fine wet/dry sandpaper works OK.<br>
      <br>
      <br>
      <div class="moz-cite-prefix">On 7/11/2023 4:14 AM, Kees Oudesluijs
        via Healeys wrote:<br>
      </div>
      <blockquote type="cite"
        cite="mid:0f93a864-5cb4-13d3-2df9-40584a21dc2b@chello.nl">
        <meta http-equiv="Content-Type" content="text/html;
          charset=UTF-8">
        <p>The leaking of the valve may improve if you lap in the cone
          with e.g. Brass Polish.<br>
          Kees Oudesluijs<br>
        </p>
        <div class="moz-cite-prefix">Op 11-7-2023 om 12:05 schreef Simon
          Lachlan via Healeys:<br>
        </div>
        <blockquote type="cite"
          cite="mid:001901d9b3df$312d6dc0$93884940$@alexarevel.plus.com">
          <meta http-equiv="Content-Type" content="text/html;
            charset=UTF-8">
          <meta name="Generator" content="Microsoft Word 15 (filtered
            medium)">
          <style>@font-face
        {font-family:"Cambria Math";
        panose-1:2 4 5 3 5 4 6 3 2 4;}@font-face
        {font-family:Calibri;
        panose-1:2 15 5 2 2 2 4 3 2 4;}@font-face
        {font-family:Consolas;
        panose-1:2 11 6 9 2 2 4 3 2 4;}p.MsoNormal, li.MsoNormal, div.MsoNormal
        {margin:0cm;
        margin-bottom:.0001pt;
        font-size:11.0pt;
        font-family:"Calibri",sans-serif;}a:link, span.MsoHyperlink
        {mso-style-priority:99;
        color:blue;
        text-decoration:underline;}a:visited, span.MsoHyperlinkFollowed
        {mso-style-priority:99;
        color:purple;
        text-decoration:underline;}pre
        {mso-style-priority:99;
        mso-style-link:"HTML Preformatted Char";
        margin:0cm;
        margin-bottom:.0001pt;
        font-size:10.0pt;
        font-family:"Courier New";}p.msonormal0, li.msonormal0, div.msonormal0
        {mso-style-name:msonormal;
        mso-margin-top-alt:auto;
        margin-right:0cm;
        mso-margin-bottom-alt:auto;
        margin-left:0cm;
        font-size:11.0pt;
        font-family:"Calibri",sans-serif;}span.HTMLPreformattedChar
        {mso-style-name:"HTML Preformatted Char";
        mso-style-priority:99;
        mso-style-link:"HTML Preformatted";
        font-family:"Consolas",serif;}span.EmailStyle20
        {mso-style-type:personal-reply;
        font-family:"Calibri",sans-serif;
        color:windowtext;}MsoChpDefault
        {mso-style-type:export-only;
        font-size:10.0pt;}div.WordSection1
        {page:WordSection1;}</style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
          <div class="WordSection1">
            <p class="MsoNormal"><span
                style="mso-fareast-language:EN-US">I agree…the handles
                are pretty frail. My heater one was solid. The one on
                the block was likewise solid and the radiator one had
                been swapped out for a simple plug.<o:p></o:p></span></p>
            <p class="MsoNormal"><span
                style="mso-fareast-language:EN-US">I took them apart and
                redid(?) them. They loosen up OK if you tap the cone
                shaped inner part outwards. I made my own handles which
                are too big, but they serve.<o:p></o:p></span></p>
            <p class="MsoNormal"><span
                style="mso-fareast-language:EN-US">“Heater valve” shows
                the valve looking fine but jammed solid. “Figure 3”
                shows it after I bust the handle and then cleaned it all
                out and replaced the handle. Of course, if I’d known to
                tap the centre through the valve, I’d never have
                busticated the handle in the first place ………..<o:p></o:p></span></p>
            <p class="MsoNormal"><span
                style="mso-fareast-language:EN-US">(If anyone wants, I
                could send a few pages on how/why I did what to those
                valves).<o:p></o:p></span></p>
            <p class="MsoNormal"><span
                style="mso-fareast-language:EN-US">Incidentally, I
                bought a good looking radiator valve on eBay. Useless,
                it dripped from the moment I screwed it in. Back in the
                box. Quite recently I noticed that Ahead4Healeys , I
                think it was, had them pictured on their site but said
                that they were withdrawn because they all leaked. See
                “Radiator Tap”.<o:p></o:p></span></p>
            <p class="MsoNormal"><span
                style="mso-fareast-language:EN-US">Simon<o:p></o:p></span></p>
            <p class="MsoNormal"><span
                style="mso-fareast-language:EN-US"><o:p> </o:p></span></p>
          </div>
          <br>
        </blockquote>
      </blockquote>
      <br>
      <br>
      <fieldset class="moz-mime-attachment-header"></fieldset>
      <pre class="moz-quote-pre" wrap="">_______________________________________________
Support Team.Net <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Suggested annual donation  $12.75

Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a> <a class="moz-txt-link-freetext" href="http://autox.team.net/archive/healeys">http://autox.team.net/archive/healeys</a>

<a class="moz-txt-link-abbreviated" href="mailto:Healeys@autox.team.net">Healeys@autox.team.net</a>
<a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a>

Unsubscribe/Manage: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl">http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl</a>

</pre>
    </blockquote>
  <div id="DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2"><br /><table style="border-top: 1px solid #D3D4DE;"><tr><td style="width: 55px; padding-top: 13px;"><a href="http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" target="_blank"><img src="https://s-install.avcdn.net/ipm/preview/icons/icon-envelope-tick-green-avg-v1.png" alt="" width="46" height="29" style="width: 46px; height: 29px;"/></a></td><td style="width: 470px; padding-top: 12px; color: #41424e; font-size: 13px; font-family: Arial, Helvetica, sans-serif; line-height: 18px;">Virusvrij.<a href="http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient" target="_blank" style="color: #4453ea;">www.avg.com</a></td></tr></table><a href="#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2" width="1" height="1"> </a></div></body>
</html>