<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
Umm, OK. Why? LdeN--or Austin, who knows--went from metal rings to
O-rings--$0.49/ea from MM (maybe the reason)--on the operating
pistons for the later cars. The ones in my BJ8's OD at about 210K
miles were somewhat flattened on the expected side, but still
worked.<br>
<br>
bs<br>
<br>
<br>
<div class="moz-cite-prefix">On 6/22/2023 6:09 PM, Hank Leach wrote:<br>
</div>
<blockquote type="cite"
cite="mid:d20df59b299c3f3cd04121113f7628c6634d92fb@webmail">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
Use metal rings-live with scores. Hank<br>
<br>
<p>-----------------------------------------</p>
From: "Michael Salter" <michaelsalter@gmail.com><br>
To: "Bob Spidell"<br>
Cc: <a class="moz-txt-link-rfc2396E" href="mailto:healeys@autox.team.net">"healeys@autox.team.net"</a><br>
Sent: Thursday June 22 2023 11:51:58AM<br>
Subject: Re: [Healeys] Overdrive accumulator piston with rings<br>
<br>
<div>Years ago I made an accumulator piston to use an O
ring.
<div>The result was an abject failure as tiny chunks of
the O ring were sliced off each time it passed over the
pressure
relief drillings in the housing.</div>
<div>Any clue as to how that has been overcome?</div>
<div><br>
</div>
<div>M</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Thu., Jun. 22, 2023, 9:41
a.m.
Bob Spidell, <<a moz-do-not-send="true">bspidell@comcast.net</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex;">
<div>I have the DWM 'uprated' accumulator set; the housing
has an
O-ring and the piston has four equally-sized metal rings.
Don't
recall any others, but don't think it was any different
than the
OEM one I took out.<br>
<br>
Too late now, but had I known of it I might have bought
the AH
Spares version with O-ring(s?) on the piston instead of
metal
rings. The metal rings will score the accumulator bore
eventually.<br>
<br>
<br>
<br>
<div>On 6/21/2023 7:35 PM, John Spaur via Healeys wrote:<br>
</div>
<blockquote>
<div>
<p class="MsoNormal">I am replacing the accumulator
housing, piston
and rings. When I opened the piston box, there was
only one wide
ring with two narrow rings. Shouldn’t there be two
wide rings and
four narrow to make up two ring sets for the piston?</p>
<p class="MsoNormal"> </p>
<p class="MsoNormal">John Spaur</p>
<p class="MsoNormal">’62 BT7</p>
</div>
<br>
</blockquote>
<br>
</div>
<br>
</blockquote>
</div>
</michaelsalter@gmail.com></blockquote>
<br>
</body>
</html>