<div dir="auto">Speaking as someone who has over the years had 2 bouts of tappet failure in 100 engines I would suggest that you are wise to be cautious.<div dir="auto">I can't advise on the tappets that you have fitted but can say the I am now using sets from A H Spares which are proving to be very satisfactory and are different from those I have had problems with.</div><div dir="auto">I have, in B.#174, a magnetic oil drain plug and have found that to be a very good indicator of impending tappet failure. On the last 2 oil changes there was absolutely no metal on the plug.</div><div dir="auto">My procedure initial start procedure was to firstly remove the inner valve springs as I have found that they and the additional pressure that they produce are just not required as my engine exhibits absolutely no sign of valve bounce right up to the red line.</div><div dir="auto">I use Lucas 20/50 break in oil for the 1st 500 miles. </div><div dir="auto">On first start I held the engine around 1500 RPM for about 20 minutes. (I have difficulty believing that this is necessary but that's what the experts recommend so you have to be sure that the cooling system is in good shape).</div><div dir="auto">I change to VR1 non synthetic 20/50 after 500 odd miles and then change the oil every 3000 miles.</div><div dir="auto">The engine in B#174 now runs with absolutely NO tappet clatter which is pretty unusual for a 100.</div><div dir="auto">I recently checked the valve clearances and they were unchanged after 2500 miles, another good indicator that the cam and tappets are holding up well.</div><div dir="auto">I'm sure others have had different experiences but I would recommend that you make every effort to avoid a cam/tappet failure because rectification requires a complete engine strip down.</div><div dir="auto">Good luck.</div><div dir="auto"><br></div><div dir="auto">M</div><div dir="auto"> (Still running perfectly with outer springs only)</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed., May 24, 2023, 8:46 a.m. Michael MacLean, <<a href="mailto:springer.mike51@gmail.com">springer.mike51@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>As I get closer to starting my 100 engine I have yet to replace the modified Denis Welch tappets like a list member suggested I do. I got nervous, so I ordered a set of NOS tappets from Ahead4Healeys to swap with the installed Welch tappets recently. Now, searching the archives, I find someone had problems with NOS lifters after 6000 miles. Ruined a cam and the lifters. So, what am I supposed to do now? Should I just buy aftermarket tappets? Are the aftermarket tappets hardened correctly? Why wouldn't the NOS tappets be hardened right? I don't want to replace the cam after I get this thing running.</div><div>Mike MacLean<br></div></div>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html" rel="noreferrer noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys" rel="noreferrer noreferrer" target="_blank">http://www.team.net/pipermail/healeys</a> <a href="http://autox.team.net/archive/healeys" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/archive/healeys</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" target="_blank" rel="noreferrer">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com" rel="noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com</a><br>
<br>
</blockquote></div>