<div dir="ltr"><div>I recently had the transmission tunnel off my car.</div><div>No problems removing the console and tunnel.</div><div>Now struggling (many hours so far) to get the console fitted again.</div><div>In particular to get the slotted bracket on top of the tunnel to line up with the 2 lower screws on the console. Over 3/4in difference in height.<br></div><div>Looks like it should go in at an angle, but the heater box is in the way and reluctant to use too much force.<br></div><div>Does the heater box really have to be completely  moved out of the way ?</div><div>Any ideas or techniques appreciated.</div><div>Tkx</div><div>rg<br></div><div><br></div><div><br></div></div>