<div dir="ltr">Thanks for all the replies and the information. I can confirm the olive is tight and the lower doesn't rotate but the trafficator can rotate freely with no resistance. It looks like the problem is inside the steering column. I will remove the trafficator and lower stator tube and report back.<div><br></div><div>Do I need to be prepared for the steering box fluid to leak out when the lower stator is removed?</div><div><br></div><div>Harold</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, Feb 13, 2023 at 3:20 AM Bob Haskell <<a href="mailto:rchaskell@earthlink.net">rchaskell@earthlink.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">The short stator tube, connected to the control head, has three dimples <br>
that ride in a slot in the long stator tube.  The short stator tube fits <br>
over the long stator tube.  Looks to me that the slot was cut with a <br>
slitting saw leaving a knife edge corners where the cracks originate.  <br>
I've made some long stator tubes, using an end mill to put a round end <br>
to the slot as Bob suggests.<br>
<br>
Hank, the fishing line that you use - line used to catch fish or to fish <br>
wires through walls (fish tape)?  If the former, how do you get the line <br>
feed through the tube?  I would tie it to the harness and pull it <br>
through when you remove the harness.  Or using some bailing wire to feed <br>
it through.<br>
<br>
Cheers,<br>
<br>
Bob Haskell<br>
Austin-Healey 3000 roadster registrar<br>
<br>
On 2/12/23 20:39, Bob Spidell wrote:<br>
> You have to pull the trafficator wiring harness up through the stator <br>
> regardless to get the trafficator out and the wheel off. Once you've <br>
> done that, I can't think of an easy way to grab the stator, so you're <br>
> better off just pulling the stator out at the box (i.e. 'by the book').<br>
><br>
> Two things cause the trafficator to rotate with the wheel: the stator <br>
> isn't secured by the olive and nut at the box end, or one or both of <br>
> the sections--long lower and short upper--are damaged somehow. They <br>
> aren't technically connected, the short upper part slides inside the <br>
> lower and has a dimple that fits in a slot in the lower. The slot is <br>
> cut square and it often cracks at the end (it should be radiused IMO).<br>
><br>
> When you get everything back together, presumably with a new stator, <br>
> make sure there's a small gap--20 thou or so--between the trafficator <br>
> and the hub so the hub doesn't drag the trafficator when you turn. <br>
> Check first to see that it's not just a loose olive and nut; if so, it <br>
> will likely leak quite a bit, but it's an easy fix.<br>
><br>
> Bob<br>
><br>
> On 2/12/2023 2:49 PM, Harold Manifold wrote:<br>
>> Hello,<br>
>><br>
>> I have started to road test my car and discovered the trafficator <br>
>> rotates with the steering wheel. The car has adjustable steering and <br>
>> further investigation strongly indicates the upper and lower stator <br>
>> tubes are not connecting inside the steering column.<br>
>><br>
>> Question - Can the lower stator tube be removed through the steering <br>
>> wheel end of the steering column?<br>
>><br>
>> Any tips and suggestions on how to do this job are appreciated.<br>
>><br>
>> Thanks... Harold<br>
>><br>
><br>
> _______________________________________________<br>
> Support Team.Net <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
> Suggested annual donation  $12.75<br>
><br>
> Archive: <a href="http://www.team.net/pipermail/healeys" rel="noreferrer" target="_blank">http://www.team.net/pipermail/healeys</a> <br>
> <a href="http://autox.team.net/archive/healeys" rel="noreferrer" target="_blank">http://autox.team.net/archive/healeys</a><br>
><br>
> <a href="mailto:Healeys@autox.team.net" target="_blank">Healeys@autox.team.net</a><br>
> <a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
><br>
> Unsubscribe/Manage: <br>
> <a href="http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/healeys/rchaskell@earthlink.net</a><br>
><br>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys" rel="noreferrer" target="_blank">http://www.team.net/pipermail/healeys</a> <a href="http://autox.team.net/archive/healeys" rel="noreferrer" target="_blank">http://autox.team.net/archive/healeys</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" target="_blank">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/manifold@telus.net" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/healeys/manifold@telus.net</a><br>
<br>
</blockquote></div>