<div dir="ltr">I had a problem with them sticking in the open position on my BJ7 with triple HD8s. There is a lot of info online about the issue and the Google results are here: <a href="https://www.google.com/search?q=grose+jets+sticking&sxsrf=AJOqlzVjtOPWOVcL1u7gTPae8casxYNJcA:1675358943772&ei=3_LbY-nfLv-g5NoP__-UYA&start=0&sa=N&ved=2ahUKEwipy9u1rvf8AhV_EFkFHf8_BQw4ChDy0wN6BAgFEAQ&biw=1470&bih=741&dpr=2">https://www.google.com/search?q=grose+jets+sticking&sxsrf=AJOqlzVjtOPWOVcL1u7gTPae8casxYNJcA:1675358943772&ei=3_LbY-nfLv-g5NoP__-UYA&start=0&sa=N&ved=2ahUKEwipy9u1rvf8AhV_EFkFHf8_BQw4ChDy0wN6BAgFEAQ&biw=1470&bih=741&dpr=2</a>. Happy reading!<div><br></div><div>Rick Neville, aka HealeyRick</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Feb 2, 2023 at 6:53 AM Bob Spidell <<a href="mailto:bspidell@comcast.net">bspidell@comcast.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div>
I've had them in my BJ8 for over 130K miles and 30 years and they've
been flawless. However, quality was rumored to have suffered over
the years; I tried them in my BN2 and one would stick occasionally
and I went back to needle-type.<br>
<br>
<br>
<div>On 2/1/2023 10:20 PM, Alan Seigrist via
Healeys wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">Hi Price -
<div><br>
</div>
<div>Grose Jets work well, just replace the jets, that's it. I
highly recommend, however, that a proper paper filter be put
in the fuel line because grose jets don't work when any crud
gets in there.</div>
<div><br>
</div>
<div>Clearance should be adjusted to be the same as normal.</div>
<div><br>
</div>
<div>Best,</div>
<div><br>
</div>
<div>Alan</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Thu, Feb 2, 2023 at 12:28
PM R. Lindsay via Healeys <<a href="mailto:healeys@autox.team.net" target="_blank">healeys@autox.team.net</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">I
have a BJ8. Are float valve grose type side bow valves better
than the originals? Do I need to use a different float lever
or just bend it down to seat and have still have 3/8”
clearance under the lever arms? Do I need a different bowl
lid?<br>
<br>
Thank you. <br>
<br>
Price Lindsay<br>
<br>
Cell: 630-841-6300<br>
Email: <a href="mailto:050.rpl@gmail.com" target="_blank">050.rpl@gmail.com</a><br>
<br>
</blockquote>
</div>
</blockquote>
<br>
</div>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys" rel="noreferrer" target="_blank">http://www.team.net/pipermail/healeys</a> <a href="http://autox.team.net/archive/healeys" rel="noreferrer" target="_blank">http://autox.team.net/archive/healeys</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" target="_blank">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/healeyrik@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/healeys/healeyrik@gmail.com</a><br>
<br>
</blockquote></div>