<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
"... pins at the ends are slightly tapered ..."<br>
<br>
Wish I'd known that ;)<br>
<br>
<br>
<div class="moz-cite-prefix">On 12/14/2022 9:04 AM, Harold Manifold
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAFP1XCDkfs_H__v6DXz9MRJQpX8Ro+PJmDKEu=AVGNBpiwc6MA@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="ltr">I have taken a number of seat tracks apart. The
pins at the ends are slightly tapered and can be easily tapped
out as long as you go the right way. I would suggest measuring
the protruding ends with calipers first. As others have
mentioned, the tricky part is replacing the threaded studs.
<div><br>
</div>
<div>Harold</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Wed, Dec 14, 2022 at 7:01
AM Bob Spidell <<a href="mailto:bspidell@comcast.net"
moz-do-not-send="true" class="moz-txt-link-freetext">bspidell@comcast.net</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px 0px
0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div> I did it with regular bolts; welded them in and ground
the heads down. One of the trickier aspects is removing the
limiting pins on each end (they also retain the ball
bearings). I don't recall how I got them out, but I remember
it was a bit of a hassle. I replaced them with roll pins. I
also lost a ball bearing or two; easy enough to replace
(5/16" IIRC).<br>
<br>
<br>
<div>On 12/13/2022 8:03 PM, Alan Seigrist via Healeys wrote:<br>
</div>
<blockquote type="cite">
<div dir="ltr">David -
<div><br>
</div>
<div>You can tack weld new T-bolts in there without too
much effort. They are pretty basic.
<div><br>
</div>
<div>Cheers,</div>
<div><br>
</div>
<div>Alan</div>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Wed, Dec 14, 2022
at 10:28 AM David Lodge via Healeys <<a
href="mailto:healeys@autox.team.net" target="_blank"
moz-do-not-send="true" class="moz-txt-link-freetext">healeys@autox.team.net</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0px 0px
0px 0.8ex;border-left:1px solid
rgb(204,204,204);padding-left:1ex">
<div>
<div>
<div dir="ltr">Has anyone had a pop at restoring
these, or do I have to act the lone
pioneer................again. (Not that I
really mind - which is a good thing! - but any
shortcuts appreciated, etc)<br>
</div>
</div>
</div>
<br>
</blockquote>
</div>
</blockquote>
<br>
</div>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://www.team.net/donate.html</a><br>
Suggested annual donation $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://www.team.net/pipermail/healeys</a>
<a href="http://autox.team.net/archive/healeys"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://autox.team.net/archive/healeys</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" target="_blank"
moz-do-not-send="true" class="moz-txt-link-freetext">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a
href="http://autox.team.net/mailman/options/healeys/manifold@telus.net"
rel="noreferrer" target="_blank" moz-do-not-send="true"
class="moz-txt-link-freetext">http://autox.team.net/mailman/options/healeys/manifold@telus.net</a><br>
<br>
</blockquote>
</div>
</blockquote>
<br>
</body>
</html>