<div dir="ltr">Listers,<div><br></div><div>For the first time ever, I put up the top on my BJ8 for the winter driving season.  Normally, I would drive with the tonneau in place (I must be getting old and soft).<br><div><br></div><div>Anyway, the top fits fine.  It is raining today so I decided to see if there were water leaks I should worry about.  No leaks over the windshield, Left hand door seemed OK (slight leak) and the right hand door leaked between the top of the glass and the rubber seal on the roof.  The right window did not go all the way up and it didn't touch the rubber at the roof rail.</div><div><br></div><div>Before I take the doors apart (both of them), is there an adjustment inside the door to either the window frame or the window mechanism that will allow the window to fit and close properly?  </div><div><br></div><div>Am I simply chasing a pipe dream to think I can make the car windows water tight (SIC)?</div><div><br></div><div>TIA for any info that will help.</div><div><br></div><div>Fred</div><div>66BJ8</div><div><br></div></div></div>