<div dir="auto">My very low mileage BN2, the frame of which I  am currently painting, has 2 apparently unused holes in the trunk floor that are definately original.  The trunk floor of my early BN1 also had the same holes however, as I had no clue as to their purpose, I did not drill them into the replacement floor of the BN1.<div dir="auto">The holes in question are 1/4" in diameter and are positioned 5.5" forward of the 5/16" diameter holes through which the threaded ends of the fuel tank straps pass.</div><div dir="auto">Obviously these holes are covered up by the fuel tank when viewed from above but are visible when looking at the underside of the trunk floor.</div><div dir="auto">Does anyone have any idea why these holes are in the in the trunk floor or what purpose they serve. (I'm guessing water drainage but that seeme a bit out of character because,  as we all know, rust prevention was not a high priority in the car's design.)</div><div dir="auto"><br></div><div dir="auto">M</div><div dir="auto"><br><div dir="auto"><br></div></div></div>