<html><body>Mike- a group of us did this one-engine only, using eyes at each end. That's a heavy engine and with the trans about 700-800, I believe. Use the "2 ton" setting for the lift and don't get under it. Like the safety strap that Steven used and could see it as just that.<div><br></div><div>I have also done them with the trans attached and added an additional chain wrap for safety. Again the strap shown would not cause paint damage. Would love to come help...but. Hank<br><br><div class="reply-new-signature"></div><p>-----------------------------------------</p>From: "Michael MacLean" <springer.mike51@gmail.com><br>To: "Ahealey help"<br>Cc: <br>Sent: Tuesday July 26 2022 4:25:17PM<br>Subject: [Healeys] Engine lift<br><br>
<div>I have a cherry picker and a load leveler to lift
the engine for my BN2. What's the best way to attach the lift
to the engine to install it in the car?
<div>Mike MacLean</div>
</div>
</springer.mike51@gmail.com></div></body></html>