<div dir="auto">Like most 100's my early BN1 runs very well until I  try to restart it after parking for a few minutes after which it is hard to start and runs badly for the first mile or so.<div dir="auto">This is of course a well known issue with these cars, which is caused by fuel boiling, and many people, including myself, have tried various types of heatshields in relatively unsuccessful attempts to eliminate this issue which has been exacerbated by the ethanol content of modern fuels.</div><div dir="auto">I'm contemplating a different approach.</div><div dir="auto">I have purchased an aftermarket windshield washer kit and I'm considering installing it with a button control to spray a mist of water onto the area of the main jet and bottom of the float chamber which I will use for a few seconds before a hot start.</div><div dir="auto">The idea is that the water mist will cool the area and prevent the fuel boiling there.</div><div dir="auto">Before I  try it I was wondering if anyone has tried this and if so what were the results.</div><div dir="auto"><br></div><div dir="auto">M</div><div dir="auto"><br></div></div>