<div dir="auto"><div dir="auto"></div>Not sure which motor I have (see photo) , but the rack is in flexible outer sheaths as you describe in your response.  <div dir="auto">Mike MacLean</div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto"><br><div class="gmail_quote" dir="auto"><div dir="ltr" class="gmail_attr">On Sun, May 15, 2022, 4:22 AM john harper <<a href="mailto:ah100tech@gmail.com" target="_blank" rel="noreferrer">ah100tech@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Mike<div><br></div><div>It is not easy a make any suggestion until we have a better idea of which wiper system you have.</div><div><br></div><div>BN1s have the Lucas CRT wiper motor with the driving inner cables in flexible outers. They can only park the blades by turning off the power at the appropriate time</div><div><br></div><div>BN2s have a Lucas DR2 motor that has a self-canceling feature. The outer of the cable runs in solid tubes that are of individual lengths. The main difference on the BN2 is that a unique mounting bracket for the motor is welded on the inner body.</div><div><br></div><div>Regards</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, 14 May 2022 at 21:01, Michael MacLean via Healeys <<a href="mailto:healeys@autox.team.net" rel="noreferrer noreferrer" target="_blank">healeys@autox.team.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>Trying to install the wiper rack and motor back into the BN2.  I find the spindle nearest the wiper motor is just short of the hole in the shroud.  Not sure if it fit before the shroud was removed and put back on because the rack and motor was given to me as a used setup for the 100 complete.  At least I think it is for a 100.  Anyone tell me what a BN2 wiper motor looks like?  The distance between the two spindles is correct.  When I put the spindles in place in the two holes in the shroud the rack does not reach the wiper motor by 1/4 to 1/2 inch.  I bought a complete new rack with spindles from the UK, but the tubing that connects to the wiper motor is a straight piece of tubing, not curved like the original one.  I have not compared it to the original curved one for length, but I suspect it is short also.  Short of trying to make one myself, are there any vendors that custom make the tubing in different lengths for the wiper rack?</div><div>Mike MacLean<br></div></div>
_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html" rel="noreferrer noreferrer noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys" rel="noreferrer noreferrer noreferrer" target="_blank">http://www.team.net/pipermail/healeys</a> <a href="http://autox.team.net/archive/healeys" rel="noreferrer noreferrer noreferrer" target="_blank">http://autox.team.net/archive/healeys</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" rel="noreferrer noreferrer" target="_blank">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/ah100tech@gmail.com" rel="noreferrer noreferrer noreferrer" target="_blank">http://autox.team.net/mailman/options/healeys/ah100tech@gmail.com</a><br>
<br>
</blockquote></div>
</blockquote></div></div></div>