<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
More-or-less. <br>
<br>
It's an, uh, 'interesting' part. Usually, you'd expect a ball valve
in this type of application but, instead of a ball the valve is
cone-shaped, with a hole for water passage. The cone is held within
the (tapered) body by a spring, with a thin washer on one side and a
thick one, notched to limit the 90deg movement, on the other.
Because it's a cone, the valve requires the spring to hold it tight
against the body, but if they part the valve will leak. I found this
out recently when my heater control valve started to leak and I
thought "No problem, I'll just close the block valve." Then, I took
a drive and the block valve started leaking so badly I needed a tow
home. I hadn't 'exercised' this valve in a long time and I think
finally getting it to move opened a gap between the cone and the
body of the valve (the spring is supposed to hold them tightly
together). I took it apart, cleaned it, and put a slightly thicker
flat washer on the spring.<br>
<br>
Moral of the story: 'Work' this valve occasionally (maybe at oil
changes). If yours is stuck, don't grab a wrench or pliers--the
handle is fragile--but lightly tap the spring side, maybe with a
screwdriver handle. If you're lucky, that will break the adhesion
between the moving, cone-shaped valve and its body.<br>
<br>
A fine example of British over-engineering.<br>
<br>
<br>
<div class="moz-cite-prefix">On 4/17/2022 9:11 AM, BJ8Healeys via
Healeys wrote:<br>
</div>
<blockquote type="cite"
cite="mid:005b01d85275$d28655a0$779300e0$@rr.com">
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<meta name="Generator" content="Microsoft Word 12 (filtered
medium)">
<!--[if !mso]>
<style>
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style>
<![endif]-->
<style>@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}p
{mso-style-priority:99;
margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}p.xmsonormal, li.xmsonormal, div.xmsonormal
{mso-style-name:x_msonormal;
margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}p.xmsochpdefault, li.xmsochpdefault, div.xmsochpdefault
{mso-style-name:x_msochpdefault;
margin:0in;
margin-bottom:.0001pt;
font-size:10.0pt;
font-family:"Times New Roman","serif";}span.xmsohyperlink
{mso-style-name:x_msohyperlink;
color:blue;
text-decoration:underline;}span.xmsohyperlinkfollowed
{mso-style-name:x_msohyperlinkfollowed;
color:purple;
text-decoration:underline;}span.xemailstyle18
{mso-style-name:x_emailstyle18;
font-family:"Calibri","sans-serif";
color:#1F497D;}span.EmailStyle23
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}div.Section1
{page:Section1;}</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="Section1">
<p class="MsoNormal"><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1F497D">Mine
does.<o:p></o:p></span></p>
<p class="MsoNormal"><a name="_MailEndCompose"
moz-do-not-send="true"><span style="font-size:11.0pt;
font-family:"Calibri","sans-serif";color:#1F497D"><o:p> </o:p></span></a></p>
<div>
<div style="border:none;border-top:solid #B5C4DF
1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">
Richard Kahn
[<a class="moz-txt-link-freetext" href="mailto:tahoehealey@hotmail.com">mailto:tahoehealey@hotmail.com</a>] <br>
<b>Sent:</b> Sunday, April 17, 2022 12:06 PM<br>
<b>To:</b> <a class="moz-txt-link-abbreviated" href="mailto:healeys@autox.team.net">healeys@autox.team.net</a>; BJ8Healeys<br>
<b>Subject:</b> Re: [Healeys] 6 cyl heater tap on the
block<o:p></o:p></span></p>
</div>
</div>
<p class="MsoNormal"><o:p> </o:p></p>
<div>
<p class="MsoNormal"><span
style="font-family:"Calibri","sans-serif";color:black">Is
the lever suppose move all the way to the perpendicular
position?<o:p></o:p></span></p>
</div>
<div class="MsoNormal" style="text-align:center" align="center">
<hr width="98%" size="2" align="center">
</div>
<div id="divRplyFwdMsg">
<p class="MsoNormal"><b><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:black">From:</span></b><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";
color:black"> Healeys
<a class="moz-txt-link-rfc2396E" href="mailto:healeys-bounces@autox.team.net"><healeys-bounces@autox.team.net></a> on behalf of
BJ8Healeys via Healeys <a class="moz-txt-link-rfc2396E" href="mailto:healeys@autox.team.net"><healeys@autox.team.net></a><br>
<b>Sent:</b> Sunday, April 17, 2022 7:01 AM<br>
<b>To:</b> <a class="moz-txt-link-abbreviated" href="mailto:healeys@autox.team.net">healeys@autox.team.net</a>
<a class="moz-txt-link-rfc2396E" href="mailto:healeys@autox.team.net"><healeys@autox.team.net></a><br>
<b>Subject:</b> Re: [Healeys] 6 cyl heater tap on the
block</span> <o:p></o:p></p>
<div>
<p class="MsoNormal"> <o:p></o:p></p>
</div>
</div>
<div>
<div>
<p class="xmsonormal"><span
style="font-size:14.0pt;font-family:"Calibri","sans-serif";color:black">The
ON position is at the full counterclockwise rotation of
the
handle.</span><o:p></o:p></p>
<p class="xmsonormal"><span
style="font-size:14.0pt;font-family:"Calibri","sans-serif";color:black">The
last time I had the valve off I took it apart, cleaned
it, and
applied anti-seize compound to the tapered shaft. Still
works very
smoothly.</span><o:p></o:p></p>
<p class="xmsonormal"><span
style="font-size:14.0pt;font-family:"Calibri","sans-serif";color:black"> </span><o:p></o:p></p>
<p class="xmsonormal"><span
style="font-size:14.0pt;font-family:"Calibri","sans-serif";color:black">Steve
Byers</span><o:p></o:p></p>
<p class="xmsonormal"><span
style="font-size:14.0pt;font-family:"Calibri","sans-serif";color:black">HBJ8L/36666</span><o:p></o:p></p>
<p class="xmsonormal"><span
style="font-size:14.0pt;font-family:"Calibri","sans-serif";color:black">BJ8
Registry</span><o:p></o:p></p>
<p class="xmsonormal"><span
style="font-size:14.0pt;font-family:"Calibri","sans-serif";color:black">AHCA
Delegate at Large</span><o:p></o:p></p>
<p class="xmsonormal"><span
style="font-size:14.0pt;font-family:"Calibri","sans-serif";color:black">Havelock,
NC USA</span><o:p></o:p></p>
<p class="xmsonormal"><a name="x__MailEndCompose"
moz-do-not-send="true"><span style="font-size:11.0pt;
font-family:"Calibri","sans-serif";color:#1F497D"> </span></a><o:p></o:p></p>
<div>
<div style="border:none;border-top:solid #B5C4DF
1.0pt;padding:3.0pt 0in 0in 0in">
<p class="xmsonormal"><b><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span
style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">
Healeys
[<a class="moz-txt-link-freetext" href="mailto:healeys-bounces@autox.team.net">mailto:healeys-bounces@autox.team.net</a>] <b>On
Behalf Of </b>Richard Kahn<br>
<b>Sent:</b> Saturday, April 16, 2022 1:02 PM<br>
<b>To:</b> Bob Spidell; <a class="moz-txt-link-abbreviated" href="mailto:healeys@autox.team.net">healeys@autox.team.net</a><br>
<b>Subject:</b> Re: [Healeys] 6 cyl heater tap on
the block</span><o:p></o:p></p>
</div>
</div>
<p class="xmsonormal"> <o:p></o:p></p>
<div>
<p class="xmsonormal"><span
style="font-family:"Calibri","sans-serif";color:black">Your
photo made me check. It actuall does say off and on
the valve. Still the lever
seems ot be half way between off and on. I have
learned not to fix anything
that is working. So, 7:30 it is until it starts
leaking someday. </span><o:p></o:p></p>
</div>
<div>
<p class="xmsonormal"><span
style="font-family:"Calibri","sans-serif";color:black"> </span><o:p></o:p></p>
</div>
<div class="MsoNormal" style="text-align:center"
align="center">
<hr width="98%" size="2" align="center">
</div>
<div id="x_divRplyFwdMsg">
<p class="xmsonormal"><b><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:black">From:</span></b><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";
color:black"> Healeys
<a class="moz-txt-link-rfc2396E" href="mailto:healeys-bounces@autox.team.net"><healeys-bounces@autox.team.net></a> on behalf of
Richard Kahn <a class="moz-txt-link-rfc2396E" href="mailto:tahoehealey@hotmail.com"><tahoehealey@hotmail.com></a><br>
<b>Sent:</b> Saturday, April 16, 2022 9:56 AM<br>
<b>To:</b> Bob Spidell <a class="moz-txt-link-rfc2396E" href="mailto:bspidell@comcast.net"><bspidell@comcast.net></a>;
<a class="moz-txt-link-abbreviated" href="mailto:healeys@autox.team.net">healeys@autox.team.net</a>
<a class="moz-txt-link-rfc2396E" href="mailto:healeys@autox.team.net"><healeys@autox.team.net></a><br>
<b>Subject:</b> Re: [Healeys] 6 cyl heater tap on the
block</span> <o:p></o:p></p>
<div>
<p class="xmsonormal"> <o:p></o:p></p>
</div>
</div>
<div>
<div>
<p class="xmsonormal"><span
style="font-family:"Calibri","sans-serif";color:black">Did
I miss the answer to the question? Is it closed in
the counterclockwise
position? My BJ8 is open (getting heat) with the
lever at the 7:30 position
viewed from the front. It has always been that way.
In US plumbing the heat
would be off with the lever perpendicular to the
hose and valve. </span><o:p></o:p></p>
</div>
<div class="MsoNormal" style="text-align:center"
align="center">
<hr width="98%" size="2" align="center">
</div>
<div id="x_x_divRplyFwdMsg">
<p class="xmsonormal"><b><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:black">From:</span></b><span
style="font-size:11.0pt;font-family:"Calibri","sans-serif";
color:black"> Healeys
<a class="moz-txt-link-rfc2396E" href="mailto:healeys-bounces@autox.team.net"><healeys-bounces@autox.team.net></a> on behalf of
Bob
Spidell <a class="moz-txt-link-rfc2396E" href="mailto:bspidell@comcast.net"><bspidell@comcast.net></a><br>
<b>Sent:</b> Saturday, April 16, 2022 9:43 AM<br>
<b>To:</b> <a class="moz-txt-link-abbreviated" href="mailto:healeys@autox.team.net">healeys@autox.team.net</a>
<a class="moz-txt-link-rfc2396E" href="mailto:healeys@autox.team.net"><healeys@autox.team.net></a><br>
<b>Subject:</b> Re: [Healeys] 6 cyl heater tap on
the block</span> <o:p></o:p></p>
<div>
<p class="xmsonormal"> <o:p></o:p></p>
</div>
</div>
<div>
<div>
<p class="xmsonormal" style="margin-bottom:12.0pt"><span
style="font-size:11.0pt">Oh,
I should have added: Be careful trying to turn,
esp. if it hasn't <br>
been 'exercised' in a while. The handle is fragile
(maybe soak in a <br>
penetrant first). Also, the valve is
spring-loaded, if you can push it <br>
in and out a few times may help loosen it.<br>
<br>
On 4/16/2022 12:57 AM, Alan Seigrist via Healeys
wrote:<br>
> Quick Q -<br>
><br>
> If looking at the tap from the top, is it
closed with the lever in the <br>
> full counterclockwise position, or the full
clockwise positiom?<br>
><br>
> Happy Easter &<br>
> Happy Passover!<br>
><br>
> Cheers,<br>
><br>
> Alan<br>
><br>
</span><br>
</p>
</div>
</div>
</div>
</div>
</div>
</div>
</blockquote>
<br>
</body>
</html>