<div dir="ltr">Tom<div><br></div><div>Assuming that the OD is always engaged it might mean that there is permanent pressure in the main operating pistons. This can be relieved by the movement of the main valve. This could stick or may be blocked. There is only a very small hole in the bottom of the valve and this could be blocked. The valve can easily be accessed by removing the threaded plug at the top of the OD and the valve pulled out. The book suggests using the tongue of a file.</div><div><br></div><div>This possibly is only applicable should as you say the OD be permanently engaged</div><div><br></div><div>Best regards</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, 24 Mar 2022 at 13:59, Tom Felts via Healeys <<a href="mailto:healeys@autox.team.net">healeys@autox.team.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div><div>So continuation of my search for OD problem answers.</div><div><br></div><div>today I jacked up the rear.  put it in  3rd, rev'ed up pretty good---flipped the OD sw---did not engage-----solenoid moving the arm up and down beautifully.  Removed the solonoid piston---ran it up in 3rd--manually moved the arm into <br>OD position---did not go into OD.</div><div><br></div><div>So--OD does not engage---by this testing method I'm not sure if it is still IN OD or not-----last time I drove it is WAS in <br>OD all the time---whether I flipped the switch or not.</div><div><br></div><div>So--------ASSUMING it is in OD all the time regardless of where the switch is--wouldn't that say that it is not a pressure problem??  If not, what could that mean?</div><div><br></div><div>ASSUMING is was NOT in OD as I was testing it, and wouldn't go into OD, could that mean a pressure problem?</div><div><br></div><div>With me moving the arm manually and not getting any reaction would that rule out a solenoid arm adjustment as the problem?</div><div><br></div><div>I'm still leaning toward a pressure problem---caused by----?????  <br></div><div><br></div><div>Guess next I'll try to do a pressure ck.  Steve---------if you would, please send the equipment.  Thanks</div><div><br></div><div>Appreciate all comments/advice.</div><div><br></div><div>Thanks</div><div>Tom</div><div>PS---before I had the unit rebuilt, it operated beautifully---and I had Red Line MTL oil in it.  I'm thinking of dumping the 30w ND and adding MTL------wishful thinking probably.</div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div><div><br></div></div>_______________________________________________<br>
Support Team.Net <a href="http://www.team.net/donate.html" rel="noreferrer" target="_blank">http://www.team.net/donate.html</a><br>
Suggested annual donation  $12.75<br>
<br>
Archive: <a href="http://www.team.net/pipermail/healeys" rel="noreferrer" target="_blank">http://www.team.net/pipermail/healeys</a> <a href="http://autox.team.net/archive/healeys" rel="noreferrer" target="_blank">http://autox.team.net/archive/healeys</a><br>
<br>
<a href="mailto:Healeys@autox.team.net" target="_blank">Healeys@autox.team.net</a><br>
<a href="http://autox.team.net/mailman/listinfo/healeys" rel="noreferrer" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
<br>
Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/ah100tech@gmail.com" rel="noreferrer" target="_blank">http://autox.team.net/mailman/options/healeys/ah100tech@gmail.com</a><br>
<br>
</blockquote></div>