<html><head><style> body {height: 100%; color:#000000; font-size:12pt; font-family:arial, helvetica, sans-serif;}</style></head><body><div>I mentioned before that my OD was VERY slow engaging. Today I pulled the tranny cover. Checked to see if the 3/16 rod would align when OD engaged. I aligned perfectly. So--I assumed the lever that is moved by the solenoid was adjusted properly. checked lever clamp to make sure the nut was tight. it was</div><div><br data-mce-bogus="1"></div><div>an observation---the movement of the lever is small---moves, but not much maybe it doesn't move much-just an observation.</div><div><br data-mce-bogus="1"></div><div>As I mentioned before it disengages from OD instantly---but going in is SLOW (minutes)or never-------.</div><div><br data-mce-bogus="1"></div><div>Now I'm back to my puzzling stage:):) What is causing it?? I'm using 30wt non-detergent. </div><div><br data-mce-bogus="1"></div><div>OH--I pulled the operating valve and checked to make sure the small hole wasn;t clogged. It wasn't.</div><div><br data-mce-bogus="1"></div><div>any other thoughts are very welcome.</div><div><br data-mce-bogus="1"></div><div>tom</div><div><br data-mce-bogus="1"></div><div><br data-mce-bogus="1"></div></body></html>