<html><head><style> body {height: 100%; color:#000000; font-size:12pt; font-family:arial, helvetica, sans-serif;}</style></head><body><div><br></div><div>it sits 1/16 of an inch from the rear ridge.</div><div><br data-mce-bogus="1"></div><div><br data-mce-bogus="1"></div><div>----- Original Message -----<br>From: Tom Felts <tomfelts@windstream.net><br>To: healeys <healeys@autox.team.net><br>Sent: Fri, 20 Aug 2021 20:49:09 -0400 (EDT)<br>Subject: pilot bush quest<br></div><div><br></div><style> body {height: 100%; color:#000000; font-size:12pt; font-family:arial, helvetica, sans-serif;}</style><div>try as I may I cannot get the pilot bush to seat flush in the motion shaft opening. if I do not get it flush against the ridge in the opening will this prevent the shaft from going in deep enough to allow the tranny to mate flush to the engine-----? </div><div><br></div><div>Thanks</div><div>Tom</div><div><br></div></body></html>