<div dir="ltr"><div>Can someone give me a measurement of the front pipe from the flange to the end that slips on to the muffler of a 100?  I bought a muffler and a tail pipe new, but a used front pipe was given to me.  This front pipe seems to have been welded to the muffler in the past and was cut off just aft of the weld.  I would like to send the front pipe to Jet Hot for coating, but I need to cut it to the correct length.  I'm not sure that is even a good idea with the flexible section in the pipe.  Would the coating crack in this area.  How much flexing does it do?  The exhaust manifold is already ceramic coated.  Just trying to keep the inevitable heat down in the engine bay.<br></div><div>Mike MacLean<br></div></div>