<html><head><style> body {height: 100%; color:#000000; font-size:12pt; font-family:arial, helvetica, sans-serif;}</style></head><body><div>Recently (maybe 6 months ago) I installed a new clutch disc and TOB. (PP looked good so didn't add a new one) Shifts great but when starting the car even with it out of gear, it "groans" a second or so when the engine starts but goes away and I would only hear it at times when I down shifted. Once hot I never heard it. Then--------I took a 600 mile trip over the last two days. I began to hear it more and at different times---Pushing the clutch in, starting the car and downshifting. Several times I heard what sounded like a "ping" when I pressed the cutch pedal.</div><div><br data-mce-bogus="1"></div><div>I have a hunch it is the PP-----could be one of the fingers got bent when installing?? Otherwise, I have no idea.</div><div><br data-mce-bogus="1"></div><div>Second------for the years I have had this car, I have hated the dreaded scuttle shake. I have balanced all wheels--even added the scuttle shake "mod" (cross beams on the inner body, behind the engine) and had the rear drums balanced locally. All to no avail-----between 55 and 65 there is comes again!! The drive was wonderful all the while as long as I drove slower or faster than these speeds.</div><div><br></div><div>What to do------what to do???</div><div><br data-mce-bogus="1"></div><div>Any thoughts would be appreciated.</div><div>Tom</div><div><br data-mce-bogus="1"></div><div><br data-mce-bogus="1"></div><div><br data-mce-bogus="1"></div><div><br data-mce-bogus="1"></div></body></html>