<div dir="auto">In my aircraft engine days installing a used nyloc nut was regarded as a cardinal sin.<div dir="auto">I have just used up the last of my OE 7/16" UNF nyloc big end nuts (AEC328) and have received a box of new ones from my fastener supplier. </div><div dir="auto">What is weird is that these grade 8 nuts are 5/8" AF whereas the originals were 11/16" AF.</div><div dir="auto">After making some enquiries it turns out that grade eight (and for that matter grade five) 7/16" UNF nyloc nuts are only available as 5/8" AF !!</div><div dir="auto">Regular 7/16" UNF nuts are 11/16" AF and 1/2" UNF nyloc and regular nuts are both 3/4" AF.</div><div dir="auto">It seems that this wrench size anomaly is unique to 7/16" nyloc nuts.</div><div dir="auto">Does anyone out there have any idea what this is all about?</div><div dir="auto"><br></div><div dir="auto">M</div><div dir="auto"><br></div></div>