<div dir="ltr"><div>Kees,</div><div><br></div><div>Thank you for sharing your wealth of information.  I have printed many of your past posts about SU fuel pumps because I have a number of Healeys and a number of original SU fuel pumps, most of which need to be rebuilt.  I much prefer to rebuild, and save, an original Healey component than to purchase a new piece. Plus, I get the satisfaction of learning and mastering new (to me) technology.</div><div><br></div><div>This forum and the listers that contribute are an invaluable resource.  Thank you all. <br></div><div><br></div><div>Richard  <br></div><div><br></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, May 10, 2021 at 12:41 AM Kees Oudesluijs <<a href="mailto:coudesluijs@upcmail.nl">coudesluijs@upcmail.nl</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><u></u>

    
<div>Richard, <br>That is a dual polarity pump. So no worries about wiring it up wrongly. It is the AUF301/303/305. I have never been able to identify the differences if any between the three. This one is an original SU, not a later Burlen-SU. It dates from around the '70's. Early ones had a metal capacitor.<br>It looks to be in really good nick.<br>Clean the points before fitting using some flower paper. It is a bit fiddly. Also check if the adjustment of the points is OK.<br>The space between the front of the points blade and the Bakelite pedestal should be 0,9mm. the space between the lower protrusion and the top of the coil housing should be 2,7mm.<br>Try the pump before fitting in the car. No problem running it dry for a few seconds.<br>Cheers,<br>Kees Oudesluijs<br></div>
 </blockquote></div>