<div style="color:black;font: 10pt Arial, Helvetica, sans-serif;">Bob / Listers
<div>From the Factory manual under Bleeding the Hydraulic System.</div>

<div>"Note:  It is advisable to turn all the brake shoe adjusters to their full "off" position before bleeding.  After bleeding adjust brakes as described."</div>

<div>Perry</div>

<div><br>
<br>

<div style="font-family:arial,helvetica;font-size:10pt;color:black"><font size="2">-----Original Message-----<br>
From: Bob Spidell via Healeys <healeys@autox.team.net><br>
To: Healeys <healeys@autox.team.net><br>
Sent: Fri, Apr 23, 2021 11:04 pm<br>
Subject: [Healeys] BN2 Brake Problem<br>
<br>

<div dir="ltr">Listers,<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">I have a problem with my BN2's brakes that is driving (heh) me up the <br>
</div>

<div dir="ltr">wall. Here's what I've done:<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">- new shoes and cylinders in both rear wheels<br>
</div>

<div dir="ltr">- one new cylinder in one front wheel (there's a total of 4 in the 2 <br>
</div>

<div dir="ltr">front wheels)<br>
</div>

<div dir="ltr">- new master cylinder<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">I hadn't touched the M/C, so after all the installs I just pressure bled <br>
</div>

<div dir="ltr">as I usually do (this has worked well on my BJ8 for decades and a couple <br>
</div>

<div dir="ltr">times for the BN2). At first, I got decent pedal then, after a period of <br>
</div>

<div dir="ltr">time I lost it; the pedal would go to the floor with only slight <br>
</div>

<div dir="ltr">pressure (probably from the return springs). Thinking it could only be <br>
</div>

<div dir="ltr">the M/C, I sprung for a new TRW brand M/C but after installing it and <br>
</div>

<div dir="ltr">bleeding I got the same results. I've put 2 full quarts of Castrol's <br>
</div>

<div dir="ltr">finest 'synthetic' DoT4 through the system and tried vacuum bleeding and <br>
</div>

<div dir="ltr">old-fashioned 'pump and hold' method; same result for all methods. I'm <br>
</div>

<div dir="ltr">not losing fluid as far as I can tell, and the pedal will pump up a bit <br>
</div>

<div dir="ltr">with a half-dozen or so strokes, but will go back to the floor after <br>
</div>

<div dir="ltr">some time.<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">Any and all ideas and suggestions accepted and welcomed.<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">TIA,<br>
</div>

<div dir="ltr">Bob<br>
</div>

<div dir="ltr">_______________________________________________<br>
</div>

<div dir="ltr">Support Team.Net <a href="http://www.team.net/donate.html" target="_blank">http://www.team.net/donate.html</a><br>
</div>

<div dir="ltr">Suggested annual donation  $12.75<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">Archive: <a href="http://www.team.net/pipermail/healeys" target="_blank">http://www.team.net/pipermail/healeys </a><a href="http://autox.team.net/archive" target="_blank">http://autox.team.net/archive</a><br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr"><a ymailto="mailto:Healeys@autox.team.net" href="mailto:Healeys@autox.team.net">Healeys@autox.team.net</a><br>
</div>

<div dir="ltr"><a href="http://autox.team.net/mailman/listinfo/healeys" target="_blank">http://autox.team.net/mailman/listinfo/healeys</a><br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">Unsubscribe/Manage: <a href="http://autox.team.net/mailman/options/healeys/healeyguy@aol.com" target="_blank">http://autox.team.net/mailman/options/healeys/healeyguy@aol.com</a><br>
</div>

<div dir="ltr"><br>
</div>
</font></div>
</div>
</div>