<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns="http://www.w3.org/TR/REC-html40"><head><meta http-equiv=Content-Type content="text/html; charset=us-ascii"><meta name=Generator content="Microsoft Word 15 (filtered medium)"><style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal-compose;
font-family:"Arial",sans-serif;
color:windowtext;
font-weight:normal;
font-style:normal;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]--></head><body lang=EN-US link="#0563C1" vlink="#954F72" style='word-wrap:break-word'><div class=WordSection1><p style='margin-top:0in;background:white'><strong><span style='font-size:12.0pt;font-family:"Calibri",sans-serif;color:#212529'>How does it work?</span></strong><span style='font-size:12.0pt;font-family:"Arial",sans-serif;color:#212529'> <o:p></o:p></span></p><p style='margin-top:0in;background:white;box-sizing: border-box;margin-bottom:1rem;font-variant-ligatures: normal;font-variant-caps: normal;orphans: 2;widows: 2;-webkit-text-stroke-width: 0px;text-decoration-thickness: initial;text-decoration-style: initial;text-decoration-color: initial;word-spacing:0px'><span style='font-size:12.0pt;font-family:"Arial",sans-serif;color:#212529'>The system is simple. The PCV valve regulates how much vacuum can pull through the crankcase. It’s hooked into the intake - when the vacuum is high at idle, the PCV valve stops most of that vacuum. As vacuum drops with an increase in RPM, The PCV valve opens, to allow a higher volume of gasses and pressure to be pulled into the intake. As a result, those gasses are recirculated back into the combustion cycle, and burnt off with the fresh fuel and air, preventing those gasses from condensing in the oil, preventing pressure from causing the seals to leak, and preventing pollution from escaping the crankcase.<o:p></o:p></span></p><p style='margin-top:0in;background:white;box-sizing: border-box;margin-bottom:1rem;font-variant-ligatures: normal;font-variant-caps: normal;orphans: 2;widows: 2;-webkit-text-stroke-width: 0px;text-decoration-thickness: initial;text-decoration-style: initial;text-decoration-color: initial;word-spacing:0px'><span style='font-size:12.0pt;font-family:"Arial",sans-serif;color:#212529'>The breather tube allows fresh air to be pulled into the engine, after the air filter, ensuring debris and moisture aren’t pulled into the engine.<o:p></o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'>You can read the entire article: <a href="https://tinyurl.com/drx8m62w">https://tinyurl.com/drx8m62w</a><o:p></o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'><o:p> </o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'>Note the comment preventing pressure from causing the seals to leak. Regarding the Breathing Tube which we do not have on our engines, in my recently installed system I plugged the breather vent in my valve cover with a solid piece of rubber, although as one listener indicated there is a small opening on the valve cover cap. I will check how much is flowing through this tiny hole so the engine breaths and circulates air the crankcase and if it is acting as a breather tube. It maybe that the T on the top of the Valve cover will need to be blocked?<o:p></o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'><o:p> </o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'>Ideas? Comments?<o:p></o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'><o:p> </o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'>Regards,<o:p></o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'><o:p> </o:p></span></p><p class=MsoNormal><span style='font-size:14.0pt;font-family:"Arial",sans-serif'>Bob Begani BJ8 late 67<o:p></o:p></span></p></div></body></html>