<html><head><meta http-equiv="Content-Type" content="text/html; charset=utf-8"></head><body style="word-wrap: break-word; -webkit-nbsp-mode: space; line-break: after-white-space;" class="">I’m getting around to installing that new exhaust and I have the stainless version of the fastening pieces.<div class="">I’ve figured out most of it, but the mounting point at the back of the main mufflers has me confused.</div><div class=""><br class=""></div><div class="">The kit comes with two bonded rubber mounts, but the bolt pattern under the car only seems to have the right orientation for one of the mounts.</div><div class="">To be more clear, one set of bolts, or studs, come down one in front of the other so that the mount slots into them, and then there is a right angle bracket that then attaches to the double spaced clamp that goes over the top of the pipes. But because the kit has two of these mounts, and two right angle brackets, I expected there to be a mirror image example next to it. But no, I’ve got another set of two studs that are diagonally oriented.</div><div class=""><br class=""></div><div class="">Difficult to describe exactly what’s going on, but the diagrams I can find of the system show one of these mounts above the double pipe bracket, and I’d assumed there were two because my kit came with two. Maybe my car doesn’t have the correct studs? The old system was held on with a non-stock arrangement.</div><div class=""><br class=""></div><div class="">Thanks for any advice.</div><div class="">Stephen, BJ8</div><div class=""><br class=""></div><div class=""><img apple-inline="yes" id="5CF8C698-2E67-4B9B-B6B5-5BED1B27C3B8" src="cid:CF2D5D61-8E91-491A-AC54-07100B4C91E3" class=""></div><div class=""><br class=""></div><div class=""><br class=""></div><div class=""><br class=""></div></body></html>