<html><body>Michael-these photos are on the disc I sent you (folder: hood -top) but you can see the general placement. The front turnbutton is most critical for fit. The second one back is a bit redundant and can vary slightly and the rear one, closest to the bar retainer, can move around a little and then you add the tenax fastener to match when completed. Feel under the fender and in the boot for a bump where the bodyman filled in the holes if original and not Kilmartin parts. Hank<br><br><div class="reply-new-signature"></div><p>-----------------------------------------</p>From: "WILLIAM B LAWRENCE via Healeys" <healeys@autox.team.net><br>To: "Michael MacLean via Healeys", "Michael MacLean"<br>Cc: <br>Sent: Saturday March 27 2021 8:31:16PM<br>Subject: Re: [Healeys] Top Bows<br><br>
<div>If the panels were replaced they would have had no holes. I
could give you dimensions, but I’m not sure mine are correct. It
would be interesting to see what the pros say.</div>
<div><br></div>
<div>Bill Lawrence</div>
<div>BN1 #554</div>
<hr style="width:98%;"><div dir="ltr"><font face="Calibri, sans-serif" style="font-size:11pt;" color="#000000"><b>From:</b> Healeys
<healeys-bounces@autox.team.net> on behalf of Michael MacLean
via Healeys <healeys@autox.team.net><br><b>Sent:</b> Sunday, March 28, 2021 2:31 AM<br><b>To:</b> Healeys <healeys@autox.team.net><br><b>Subject:</b> [Healeys] Top Bows</font>
<div> </div>
</div>
<div>Can someone tell me the measurement for the 3 holes per side
to mount the top bows for my BN2? For some reason these holes
were filled in by some ignorant body and fender guy. I don't
know if this was done before or after I got the car, but I need to
drill them out now.
<div>Mike
MacLean<br><br><div><a href="https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature">
Sent from AT&T Yahoo Mail on Android</a></div>
</div>
</div>
</healeys@autox.team.net></body></html>