<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=Windows-1252">
</head>
<body>
<div>I thought the question was about the placement of the triangular plates that suppport and locate the lower ends of the hood sticks. I had to locate these with no real clue as to their proper position. I did it by attaching the top to the body cleats at
the rear and the windscreen at the front and then erecting the sticks underneath. After I had them I about the right position and fully extended I marked the positions for the screws. I was probably lucky and my top seems to fit correctly, but it would have
been nice to have a template.</div>
<div><br>
</div>
<div>Bill Lawrence</div>
<div>BN1 #554</div>
<hr style="display:inline-block;width:98%" tabindex="-1">
<div id="divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" style="font-size:11pt" color="#000000"><b>From:</b> gradea1@charter.net <gradea1@charter.net><br>
<b>Sent:</b> Sunday, March 28, 2021 6:34 PM<br>
<b>To:</b> 'WILLIAM B LAWRENCE' <ynotink@msn.com><br>
<b>Cc:</b> 'Michael MacLean via Healeys' <healeys@autox.team.net>; 'Michael MacLean' <rrengineer.mike@att.net><br>
<b>Subject:</b> Re: [Healeys] Top Bows</font>
<div> </div>
</div>
<div>Michael-these photos are on the disc I sent you (folder: hood -top) but you can see the general placement. The front turnbutton is most critical for fit. The second one back is a bit redundant and can vary slightly and the rear one, closest to the bar
retainer, can move around a little and then you add the tenax fastener to match when completed. Feel under the fender and in the boot for a bump where the bodyman filled in the holes if original and not Kilmartin parts. Hank<br>
<br>
<div class="x_reply-new-signature"></div>
<p>-----------------------------------------</p>
From: "WILLIAM B LAWRENCE via Healeys" <br>
To: "Michael MacLean via Healeys", "Michael MacLean"<br>
Cc: <br>
Sent: Saturday March 27 2021 8:31:16PM<br>
Subject: Re: [Healeys] Top Bows<br>
<br>
<div>If the panels were replaced they would have had no holes. I could give you dimensions, but I’m not sure mine are correct. It would be interesting to see what the pros say.</div>
<div><br>
</div>
<div>Bill Lawrence</div>
<div>BN1 #554</div>
<hr style="width:98%">
<div dir="ltr"><font face="Calibri, sans-serif" color="#000000" style="font-size:11pt"><b>From:</b> Healeys <healeys-bounces@autox.team.net> on behalf of Michael MacLean via Healeys <healeys@autox.team.net><br>
<b>Sent:</b> Sunday, March 28, 2021 2:31 AM<br>
<b>To:</b> Healeys <healeys@autox.team.net><br>
<b>Subject:</b> [Healeys] Top Bows</font>
<div> </div>
</div>
<div>Can someone tell me the measurement for the 3 holes per side to mount the top bows for my BN2? For some reason these holes were filled in by some ignorant body and fender guy. I don't know if this was done before or after I got the car, but I need to
drill them out now.
<div>Mike MacLean<br>
<br>
<div><a href="https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature">Sent from AT&T Yahoo Mail on Android</a></div>
</div>
</div>
</div>
</body>
</html>