<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
Soooooo ... that could be the cause of hard turning?<br>
<br>
<div class="moz-cite-prefix">On 1/4/2021 2:12 PM, Michael Salter
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAB3i7LJegjCCWg-x6tkFNmNzgfPO3F23H8iJ-kYfpurgkusFsQ@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="auto">Castor should be 1 3/4 degrees ... it's in the
factory manual ..
<div dir="auto">Bear in mind that sagged rear springs can add to
that.</div>
<div dir="auto">2 1/2 degrees is way too much.</div>
<div dir="auto"><br>
</div>
<div dir="auto">M</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr" class="gmail_attr">On Mon., Jan. 4, 2021, 5:01
p.m. Bob Spidell, <<a href="mailto:bspidell@comcast.net"
moz-do-not-send="true">bspidell@comcast.net</a>> wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div> Nope. For once, I'm NOT confused. I've acquired an
interest in chassis geometry WRT to handling characteristics
(and can't spend ALL my time correcting people on the
interwebs ;). I know Healey geometry is usually fixed; but
my BN2 has Kilmartin adjustable camber plates, and I
acquired a set of shock plate inserts for my BJ8. I believe
I can remove the ends of the shock plates, remove the
captive nuts and lengthen and widen the holes enough to
allow a couple degrees of camber adjustment and maybe a
degree or two of caster adjustment. I bought a 4-wheel
alignment kit to do the measuring.<br>
<br>
My BN2 is surprisingly hard to turn, and only got more so
when I installed a smaller diameter steering wheel. It has
2-2.5deg pos. caster; I think lessening that a little might
decrease steering effort (which may be normal, but I've only
driven this one BN2). If it makes the car too 'squirrely' I
can fiddle with it until I get the handling I like.<br>
<br>
Bob<br>
<br>
<div>On 1/4/2021 1:36 PM, Neil Anderson wrote:<br>
</div>
<blockquote type="cite">
<div dir="auto">
<div>Bob,
<div dir="auto">I think you mean camber angle. Caster
is the forward/rearward angle inclination of the
swivel upright, which is permanently set on a
Healey. Camber is the top inward or outward angle
tilt of the wheel when viewed front front.</div>
<div dir="auto"><br>
</div>
<div dir="auto">Not sure what the factory camber angle
is, but what you stated is probably close. </div>
<div dir="auto"><br>
</div>
Neil Anderson</div>
<div dir="auto"><br>
<div class="gmail_quote" dir="auto">
<div dir="ltr" class="gmail_attr">On Mon, Jan 4,
2021, 2:28 PM Bob Spidell <<a
href="mailto:bspidell@comcast.net"
rel="noreferrer noreferrer" target="_blank"
moz-do-not-send="true">bspidell@comcast.net</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">Listers,<br>
<br>
What's the recommended setting (my version of the
shop manual doesn't <br>
specify one)? I think the BJ8 manual recommends
1-2deg pos.<br>
<br>
Bob<br>
</blockquote>
</div>
</div>
</div>
</blockquote>
<br>
</div>
<br>
</blockquote>
</div>
</blockquote>
<br>
</body>
</html>