<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=Windows-1252">
</head>
<body>
So I was finally able to check the tightness of the pipe to float bowl and it seems to be ok. I also removed the float and there dis gasoline in the bowl but only below the orifice leading to the tube to the jet. Didn’t see any evidence of a crack or hole in
the bowl. Now I will need to remove the carburetor in order to change the jet and tube. Does anyone have any suggestions on getting only the rear carb off. So far I have tried every contortion I can but can’t get to the lower front nut. I think I will need
to remove both carbs in order to get the rear carb out. It has been 20-30 years since I last rebuilt the carbs and don’t remember exactly how I did it.
</body>
</html>