<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
</head>
<body>
It probably won't cure the problem, but you could put a thicker oil
in just to see what effect it has. Later BMC manuals endorse
20W-50--I used it in my BJ8 for many miles--but I've run MT-90 in
the BJ8 and BN2 for years; works the same in both boxes.<br>
<br>
Bob<br>
<br>
<div class="moz-cite-prefix">On 5/24/2020 7:20 PM, John Spaur wrote:<br>
</div>
<blockquote type="cite"
cite="mid:00a201d6323b$010ae9c0$0320bd40$@sbcglobal.net">
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
<meta name="Generator" content="Microsoft Word 15 (filtered
medium)">
<style><!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri",sans-serif;}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:#0563C1;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:#954F72;
text-decoration:underline;}
span.EmailStyle17
{mso-style-type:personal;
font-family:"Calibri",sans-serif;
color:windowtext;}
span.EmailStyle18
{mso-style-type:personal-reply;
font-family:"Calibri",sans-serif;
color:#1F497D;}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page WordSection1
{size:8.5in 11.0in;
margin:1.0in 1.0in 1.0in 1.0in;}
div.WordSection1
{page:WordSection1;}
--></style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="WordSection1">
<p class="MsoNormal"><span style="color:#1F497D">I use 30 weight
oil. I have not had a chance to check all of the electrical
but last time I checked it was good. I think it might be an
issue with the switch at the shifter loosening. Interesting
about the pump and accumulator.<o:p></o:p></span></p>
<p class="MsoNormal"><span style="color:#1F497D"><o:p> </o:p></span></p>
<p class="MsoNormal"><span style="color:#1F497D">John<o:p></o:p></span></p>
<p class="MsoNormal"><span style="color:#1F497D"><o:p> </o:p></span></p>
<div>
<div style="border:none;border-top:solid #E1E1E1
1.0pt;padding:3.0pt 0in 0in 0in">
<p class="MsoNormal"><b>From:</b> Healeys
[<a class="moz-txt-link-freetext" href="mailto:healeys-bounces@autox.team.net">mailto:healeys-bounces@autox.team.net</a>] <b>On Behalf Of </b>Bob
Spidell<br>
<b>Sent:</b> Sunday, May 24, 2020 6:11 PM<br>
<b>To:</b> <a class="moz-txt-link-abbreviated" href="mailto:healeys@autox.team.net">healeys@autox.team.net</a><br>
<b>Subject:</b> Re: [Healeys] Intermittent OD problem<o:p></o:p></p>
</div>
</div>
<p class="MsoNormal"><o:p> </o:p></p>
<p class="MsoNormal" style="margin-bottom:12.0pt">I've had
intermittency issues with my OD due to a bad dash switch,
relay and throttle switch (not all at once). I'd check the
electrical stuff first, since it's (relatively) easy to get
to. But, since the problem occurs when hot it could be the
pump and/or accumulator. What fluid are you using?<br>
<br>
Bob<span style="font-size:12.0pt"><o:p></o:p></span></p>
<div>
<p class="MsoNormal">On 5/24/2020 11:03 AM, John Spaur wrote:<o:p></o:p></p>
</div>
<blockquote style="margin-top:5.0pt;margin-bottom:5.0pt">
<p class="MsoNormal">When the car is cold the OD will work
fine. However, once warmed up if I turn it off and then
switch it on, it will not reengage. What could be wrong?<o:p></o:p></p>
<p class="MsoNormal"> <o:p></o:p></p>
<p class="MsoNormal">John Spaur<o:p></o:p></p>
<p class="MsoNormal">’62 BT7<o:p></o:p></p>
<p class="MsoNormal"><span
style="font-size:12.0pt;font-family:"Times New
Roman",serif"><o:p> </o:p></span></p>
</blockquote>
<p class="MsoNormal"><span
style="font-size:12.0pt;font-family:"Times New
Roman",serif"><o:p> </o:p></span></p>
</div>
</blockquote>
<br>
</body>
</html>