<html>
<head>
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
</head>
<body>
What do y'all use? I have several, none of which are ideal; I have
one of these:<br>
<br>
<a class="moz-txt-link-freetext" href="https://www.harborfreight.com/tube-bending-pliers-95782.html">https://www.harborfreight.com/tube-bending-pliers-95782.html</a><br>
<br>
Which <i>should</i> work well, but has sharp edges which nick the
line, which of course is not a good thing (I know, HARBOR FREIGHT
'quality'). I also have several of the articulating/anvil kind,
which works OK but it's nigh impossible to get a really tight bend:<br>
<br>
<a class="moz-txt-link-freetext" href="https://www.harborfreight.com/tubing-bender-3755.html">https://www.harborfreight.com/tubing-bender-3755.html</a><br>
<br>
Anybody got one of these:<br>
<br>
<a class="moz-txt-link-freetext" href="https://www.eastwood.com/eastwood-4n1-tubing-bender.html">https://www.eastwood.com/eastwood-4n1-tubing-bender.html</a><br>
<br>
The lines to the rear slave cylinders, in particular, have a
small--1" or less--radius and I'd like to do them right.<br>
<br>
Bob<br>
</body>
</html>