<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body>
<p>Any baffles in the sump? The oil is probably slushing around when
braking hard. If the dipstick is the original do not raise the oil
level. Adhere to max because if the level is too high frothing of
the oil may occur resulting in loss of oil pressure.</p>
<p>Kees Oudesluijs</p>
<p><br>
</p>
<p><br>
</p>
<div class="moz-cite-prefix">Op 9-5-2020 om 20:24 schreef Roger
Grace:<br>
</div>
<blockquote type="cite"
cite="mid:1035127235.99423591.1589048671014.JavaMail.zimbra@mailid.telus.net">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<style> body {height: 100%; color:#000000; font-size:12pt; font-family:arial,helvetica,sans-serif;}</style>
<div><br>
</div>
<div><br>
</div>
<div>
<style> body {height: 100%; color:#000000; font-size:12pt; font-family:arial,helvetica,sans-serif;}</style></div>
<div>'67 BJ8 with recently rebuilt engine and cast alloy oil pan
by PO.</div>
<div>7 Qts VR1shows marginally above top dip stick mark.<br>
</div>
<div>Oil cooler</div>
<div>Normal running and idle OP is fine</div>
<div><br>
</div>
<div>Would welcome comments from more experienced listers.</div>
<div>When oil is really hot - after a run after and after moderate
hard braking (not panic stop) OP falls to zero for about 2-3
secs before recovering to normal - around 48 psi. Not noticed
when oil is cold.<br>
</div>
<div><br>
</div>
<div>My thoughts:<br>
</div>
<div><br>
</div>
<div>Are there differences in the length of the pump input
strainer assembly ?<br>
</div>
<div><br>
</div>
<div>Maybe should be using more oil with the extra oil cooler
volume ? Maybe this dip stick is incorrect for this type of sump
?<br>
</div>
<div><br>
</div>
<div>This is bad for my BP - particularly when watching zero on
gauge and waiting for it to pick up !!<br>
</div>
<div><br>
</div>
<div>Thank you<br>
</div>
<div>rg<br>
</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<div><br>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
Support Team.Net <a class="moz-txt-link-freetext" href="http://www.team.net/donate.html">http://www.team.net/donate.html</a>
Suggested annual donation $12.75
Archive: <a class="moz-txt-link-freetext" href="http://www.team.net/pipermail/healeys">http://www.team.net/pipermail/healeys</a> <a class="moz-txt-link-freetext" href="http://autox.team.net/archive">http://autox.team.net/archive</a>
<a class="moz-txt-link-abbreviated" href="mailto:Healeys@autox.team.net">Healeys@autox.team.net</a>
<a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/listinfo/healeys">http://autox.team.net/mailman/listinfo/healeys</a>
Unsubscribe/Manage: <a class="moz-txt-link-freetext" href="http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl">http://autox.team.net/mailman/options/healeys/coudesluijs@chello.nl</a>
</pre>
</blockquote>
</body>
</html>