<html><body>Actually there are 5 long bolts, setscrews (2K3109) that secure the control (9) to the side cover ((7) and one stud on the left-middle for a nut/spring washer... there is one short one (2K3097) on right-middle... the parts book is incorrect listing the long for the short. Three setscrews (2K3094) on the left, then additionally hold the cover to the box. See diagram. Remember the two gaskets and use sealant each side or they will leak.<p>Hank, healeyhelper.com<br><br><div class="reply-new-signature"></div><p>-----------------------------------------</p>From: "Eric Metzner" <ericmetzner@gmx.de><br>To: healeys@autox.team.net<br>Cc: <br>Sent: Thursday March 12 2020 7:42:44AM<br>Subject: [Healeys] Long bolt BN1 remote control housing<br><br>Dear BN1 specialists,<br>
I m wondering where the long bolt at the remote control housing at the BN1 gearbox goes to? Any hint would appreciated before I mess up my housing.<br>
BR<br>
Eric<br>
</ericmetzner@gmx.de></p></body></html>