<html><head><meta http-equiv="content-type" content="text/html; charset=utf-8"></head><body dir="auto">Oh, I’m a donut, just trusted the spare parts list without having a close look to what’s in front of me. Ordered a long bolt from an German Healey parts supplier - so they also do not know that there is a mislead.<div>Hank, do you now how long the “short” setscrew is?<div>Related to the gaskets I normally use permatex Aviation 3h on both sides - do you think that will work - it’s the first time I’m doing a BN1 gearbox 😀<br><div>Thanks a lot in advance</div><div>best regards </div><div>Eric<br><br><div id="AppleMailSignature" dir="ltr">Von meinem iPad gesendet</div><div dir="ltr"><br>Am 12.03.2020 um 17:52 schrieb <a href="mailto:gradea1@charter.net">gradea1@charter.net</a>:<br><br></div><blockquote type="cite"><div dir="ltr">Actually there are 5 long bolts, setscrews (2K3109) that secure the control (9) to the side cover ((7) and one stud on the left-middle for a nut/spring washer... there is one short one (2K3097) on right-middle... the parts book is incorrect listing the long for the short. Three setscrews (2K3094) on the left, then additionally hold the cover to the box. See diagram. Remember the two gaskets and use sealant each side or they will leak.<p>Hank, <a href="http://healeyhelper.com">healeyhelper.com</a><br><br></p><div class="reply-new-signature"></div><p>-----------------------------------------</p>From: "Eric Metzner" <ericmetzner@gmx.de><br>To: <a href="mailto:healeys@autox.team.net">healeys@autox.team.net</a><br>Cc: <br>Sent: Thursday March 12 2020 7:42:44AM<br>Subject: [Healeys] Long bolt BN1 remote control housing<br><br>Dear BN1 specialists,<br>
I m wondering where the long bolt at the remote control housing at the BN1 gearbox goes to? Any hint would appreciated before I mess up my housing.<br>
BR<br>
Eric<br>
</ericmetzner@gmx.de><p></p>
</div></blockquote></div></div></div></body></html>